| | | | |
Picture | | | | Order |
|
|
|
Gedore 1416057 socket wrench (1 offer) For very heavy-duty work. To use with club hammer or pneumatic hammer for tightening or loosening. Hot forged, sandblasted. |
|
from € 118.98* per piece |
|
|
|
|
from € 38.48* per piece |
|
|
Gedore 1.34/4 (1 offer) For use with sliding hammer no. 1.35/0 or counter-support brace no. 1.36/1 Multiple wrench size (11 + 13 mm) |
|
from € 78.77* per piece |
|
|
Gedore 1.22/1 (1 offer) Double-ended hooks Particularly suitable for separating and removing flush-seated parts Especially economical as it covers a range of different sizes |
|
from € 163.86* per piece |
|
|
Gedore 1416111 socket wrench (1 offer) For very heavy-duty work. To use with club hammer or pneumatic hammer for tightening or loosening. Hot forged, sandblasted. |
|
from € 151.61* per piece |
|
|
Gedore S 8008 (1 offer) Most popular sizes, packed in environmentally-friendly cardboard box Particularly suitable for barely accessible places For internal and external circlip rings With straight and 90° angled tips |
|
from € 106.73* per piece |
|
|
Gedore 1.34/10 (1 offer) Titanium-nitrided surface Multiple wrench size (11 + 13 mm) M10 connecting thread Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out sho... |
|
from € 299.56* per piece |
|
|
Gedore 1.19/2 (1 offer) The tried and tested range for economical bearing removal |
|
from € 110.79* per piece |
|
|
Gedore 1416197 socket wrench (1 offer) For very heavy-duty work. To use with club hammer or pneumatic hammer for tightening or loosening. Hot forged, sandblasted. |
|
from € 184.76* per piece |
|
|
Gedore 1.40/5 (1 offer) Operation: To remove tightly-seated parts, the sharp edges of the separator blades are pressed behind the part and it is then withdrawn using the correct puller no. 1.38. To avoid damage to delicat... |
|
from € 615.96* per piece |
|
|
Gedore 1.64/1 (1 offer) For wheel stud circles 100-155 mm with 6 mm screws For tapped holes up to max. M14 Operation: The puller is attached to the drive shaft flange using the nuts of the wheel bolts. By striking the spi... |
|
from € 164.21* per piece |
|
|
Gedore 1416227 socket wrench (1 offer) For very heavy-duty work. To use with club hammer or pneumatic hammer for tightening or loosening. Hot forged, sandblasted. |
|
from € 176.13* per piece |
|
|
Gedore S 8303 JC (1 offer) Practical set composition in environmentally-friendly cardboard box JC = chrome-plated, with 2-component handles |
|
from € 90.19* per piece |
|
|
Gedore 1416308 socket wrench (1 offer) For very heavy-duty work. To use with club hammer or pneumatic hammer for tightening or loosening. Hot forged, sandblasted. |
|
from € 307.46* per piece |
|
|
Gedore 1.55/1 (1 offer) Operation: With pressure released, the press is placed between the pressure spindle and the end of the shaft. The pressure spindle is then tightened firmly. Care must be taken that the centreline o... |
|
from € 119.43* per piece |
|
|