| | | | |
Picture | | | | Order |
|
|
|
Gedore 1.30/4A (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 49.39* per piece |
|
|
Gedore 1.18/0 (1 offer) Removes bearings swiftly and cleanly Can also be used with sliding hammer no. 1.35/1A |
|
from € 36.95* per piece |
|
|
Gedore 1394355 screwdriver bit (1 offer) Acc. to DIN 7422. Square drive as per DIN 3120 - C 10, ISO 1174, with ball retaining groove. Hand-operated, knurled grip. Chrome-plated. With pressed-in pin in Gedore vanadium special steel, mangan... |
|
from € 14.84* per piece |
|
|
Gedore 1958089 hammer (1 offer) Suited for the removal of small ball bearings since there is often not enough room for counter-support braces. Can also be used with threaded inserts no. 1.81. |
|
from € 155.96* per piece |
|
|
Gedore 1.30/3 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 50.99* per piece |
|
|
Gedore 1.17/10 (1 offer) Heavy-duty pattern for the removal of gear wheels, spoked wheels, pulleys, etc The legs grip automatically For the assembly of a 2- or 3-arm puller |
|
from € 373.59* per piece |
|
|
Gedore 1394398 screwdriver bit (1 offer) Acc. to DIN 7422. Square drive as per DIN 3120 - C 10, ISO 1174, with ball retaining groove. Hand-operated, knurled grip. Chrome-plated. With pressed-in pin in Gedore vanadium special steel, mangan... |
|
from € 15.60* per piece |
|
|
Gedore 1965603 ruler (1 offer) Steel rule with millimetre and inch graduation acc. to DIN ISO 2768. Top edge 1/64; 1/32 and 1/16 inch graduation, bottom edge 1/2 mm and 1/1 mm graduation. Etched graduation for a legible reading.... |
|
from € 10.87* per piece |
|
|
|
|
from € 15.56* per piece |
|
|
Gedore 1.30/8 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 110.57* per piece |
|
|
Gedore 1.18/02 (1 offer) Removes bearings swiftly and cleanly Can also be used with sliding hammer no. 1.35/1A |
|
from € 35.21* per piece |
|
|
Gedore 1394371 screwdriver bit (1 offer) Acc. to DIN 7422. Square drive as per DIN 3120 - C 10, ISO 1174, with ball retaining groove. Hand-operated, knurled grip. Chrome-plated. With pressed-in pin in Gedore vanadium special steel, mangan... |
|
from € 14.82* per piece |
|
|
|
|
from € 28.29* per piece |
|
|
|
|
from € 16.39* per piece |
|
|
Gedore 1.30/4 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 52.42* per piece |
|
|