Scale Model Parts & Accessories (632 items)

Radius 437.5 mm / 17-1/4". Curve 30°. Width 64 mm / 1-5/16". For R2 radius C track curved sections. One ramp section is the same length as the 24230 track section.

Length 360 mm / 14-3/16". Width 64 mm / 1-5/16". Height 117 mm / 4-5/8". For straight sections of C track. One arched bridge is the same length as the 24188 + 24172 track sections. The 74620 bridge...

This can be installed anywhere on the layout under the rails.

This is installed between the third rail clips at the ends of the track.

This is installed at rail joints between the third rail clips to separate track circuits. Contents 5 pieces.

One each right and left turnout lantern for installation on turnouts with the detachable turnout mechanism. The turnout lantern can be used with hand levers, the turnout mechanism, or the below-bas...

This kit is for installing two turnout mechanisms. It can be adjusted for boards from 8 to 25 mm /approx. 5/16" to 1". Installation template included.

This is an improved version of the turnout mechanism. This mechanism can be used with turnouts (new versions),the double slip switch, and the KOMBI extension set program. The mechanism has an autom...

The reed switch is for use at a suitable point with K Track or C Track. The reed switch triggers a pulse of current when a locomotive or car with a magnet mounted on the underside passes over it. T...

6 pieces. 10 x 5 x 1.5 mm / approx. 25/64" x 3/16" x 1/16". This magnet is for activating 7555 reed switches. It is for locomotives with little ground clearance.

2 pieces. 10 x 10 x 3 mm / approx. 3/8" x 3/8" x 1/8". This magnet is for activating the reed switch. It is for freight and passenger cars.

Radius 424.6 mm / 16-3/4". For K Track only (standard curve II). 3 clips for mounting track. The length and radius are the same as 2231 track.

Contents: 10 pieces of each. These rail joiners and clips are for joints with other track when the flex track is cut.

Prototype: German Federal Railroad (DB) standard design yard signal. High mounted signal with tubular mast. 2 settings: "Stop" - red/red (Sh0) and "Proceed" - white/white (Sh1). Model: The signal h...

Prototype: German Federal Railroad (DB) standard design distant signal. Distant signal with 3 settings: "Prepare to Stop" - yellow/yellow (Vr0), "Prepare to Proceed" - green/green (Vr1), and "Prepa...