Scale Model Parts & Accessories (632 items)

Universal circuit board with several LEDs, which will fit in most of the passenger cars in the Märklin H0 program. One 73400 is required for a short car (example: Langenschwalbach cars); for long c...

Universal circuit board with several white LEDs to fit in most of the passenger cars in the Märklin H0 program. One 73401 board is required for a short car (example: Langenschwalbach cars); two boa...

This is for the lighting kit. It has an asymmetrical pickup shoe and a ground spring.

This is a universal circuit board with two red LEDs for use with the new generation UIC-x and TEE cars in the Märklin H0 program (car length 28.2 cm / 11-1/8"). 2 permanently attached connecting wi...

Lighted lantern included. Maintenance-free LED. Length 38 mm /1-1/2". The track bumper can be clipped onto the rails. A wood screw for installation is included.

To separate power circuits or signal blocks. 8 pieces for 4 insulation points.

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire. Length 1 meter / 39". The 74040 feeder wire set can only be used with the older genera...

This is a metal lattice mast and has a metal hanger arm. A base with a mounting screw and a slide-on connection is included. An additional base as a clip for C Track is included. Height 100 mm / 3-...

This is a metal lattice mast and has two metal hanger arms. Both arms are electrically insulated. A base with a mounting screw and a slide-on connection is included. An additional base as a clip fo...

This is a tower mast with an additional outrigger beam and 2 mounted hanger arms, all made of metal. Both arms are electrically insulated. The outer arm is adjustable to 117.5 mm / 4-5/8". Height 1...

This mast is for supplying power to an area of catenary and for signal blocks. It is a metal lattice mast and has a metal hanger arm. A base with a mounting screw and a slide-on connection is inclu...

This is a simple track block signal without a mast for use in switch yards and station areas. The signal aspects change from Sh0 (red/red) to Sh1 (yellow/yellow). Track current can be controlled by...

This is a simple block signal for use on rail lines away from station areas. The signal aspects change from Hp0 (red) to Hp1 (green). Track current can be controlled by means of the control box. Ma...

Length 180 mm / 7-3/32". Width 64 mm / 1-5/16". For straight sections of C track. Two ramp sections are the same length as the 24188 + 24172 track sections.

Length 180 mm / 7-3/32". Width 64 mm / 1-5/16". Height 45 mm / 1-3/4". For straight sections of C track. Two truss bridges are the same length as the 24188 + 24172 track sections. This bridge can a...