Track & Ballast (175 items)

For mounting C Track. 1.6 x 13 mm / 1/16" x 1/2" with cross point head. Contents 200 pieces.

This can be installed anywhere on the layout under the rails.

This is installed between the third rail clips at the ends of the track.

This is installed at rail joints between the third rail clips to separate track circuits. Contents 5 pieces.

One each right and left turnout lantern for installation on turnouts with the detachable turnout mechanism. The turnout lantern can be used with hand levers, the turnout mechanism, or the below-bas...

This kit is for installing two turnout mechanisms. It can be adjusted for boards from 8 to 25 mm /approx. 5/16" to 1". Installation template included.

This is an improved version of the turnout mechanism. This mechanism can be used with turnouts (new versions),the double slip switch, and the KOMBI extension set program. The mechanism has an autom...

The reed switch is for use at a suitable point with K Track or C Track. The reed switch triggers a pulse of current when a locomotive or car with a magnet mounted on the underside passes over it. T...

Contents: 10 pieces of each. These rail joiners and clips are for joints with other track when the flex track is cut.

These screws are for mounting track sections (H0) or for mounting bridge sections on bridge pillars (Märklin Z).

Length 110 mm / 4-3/8".