Track & Ballast (834 items)

6 pieces. 10 x 5 x 1.5 mm / approx. 25/64" x 3/16" x 1/16". This magnet is for activating 7555 reed switches. It is for locomotives with little ground clearance.

2 pieces. 10 x 10 x 3 mm / approx. 3/8" x 3/8" x 1/8". This magnet is for activating the reed switch. It is for freight and passenger cars.

The basic 300 mm / 11-13/16“ straight section is the foundation of the LGB track program. All LGB track sections are made with solid brass rails for reliable operation indoors and outdoors.

52 mm / 2-1/16“ long straight section of track for a variety of uses.

82 mm / 3-1/4“ long straight section of track.

This straight section of track can be adjusted quickly and easily to any length between 88 and 120 mm / 3-1/2“ and 4-3/4“. No tools are required to do this.

This set allows you to set up a trouble-free reverse loop circuit for analog operation without additional wiring. The set contains an LGB 10152 separation section of track and a special section of ...

Both rails are separated or gapped on this section of track that can be used for many purposes. A hidden terminal clip facilitates electrical connections. The length of this section of track is 150...

One rail is interrupted or gapped on this section of track. The interrupter track can be used for the circuit for an insulated block in front of signals. A hidden terminal clip facilitates electric...

Insulated rail joiners allow you to set up isolated block sections of track. To do this the metal rail joiners must be replaced by these sturdy plastic rail joiners. A package has 4 pieces.

This track bumper with a lighted lantern can be mounted on straight sections of track.

This is a model of a track bumper with rails bent up as was done in the early days of railroading to safeguard the ends of sidings. Such track bumpers can still be found at stations.

This is a manual uncoupler for cars with standard LGB hook-and-loop couplers. The manual uncoupler can be installed in straight sections of track. When symmetrical couplers are installed, use two m...