Track & Ballast (175 items)

6 pieces. 10 x 5 x 1.5 mm / approx. 25/64" x 3/16" x 1/16". This magnet is for activating 7555 reed switches. It is for locomotives with little ground clearance.

2 pieces. 10 x 10 x 3 mm / approx. 3/8" x 3/8" x 1/8". This magnet is for activating the reed switch. It is for freight and passenger cars.

Straight track: 440 mm / 17-5/16“. Branch: right, R3, 22.5°. The turnout mechanism (LGB 12010) can be installed on the right or the left side of the turnout. The LGB control box (LGB 51755) or its ...

With H0 Scale Märklin as the first manufacturer has made sure that the dream of having your own model railroad is easier to fulfill: Sturdy enough to withstand the rough, everyday routine in the pl...

The rerailer ramp facilitates placing multi-axle locomotives and cars on the track. Length 30 cm / 11-1/16". Height 2.5 cm / 1".

Lighted lantern included. Maintenance-free LED. Length 38 mm /1-1/2". The track bumper can be clipped onto the rails. A wood screw for installation is included.

Length 38 mm / 1-1/2". The track bumper can be clipped onto the rails. A wood screw for installation is included.

To separate power circuits or signal blocks. 8 pieces for 4 insulation points.

This feeder wire set has spade connectors for C Track. The set has two-conductors with a red and a brown wire. Length 1 meter / 39". The 74040 feeder wire set can only be used with the older genera...

This decoder is for installation in a 24720 C Track wide-angle double slip switch or a 62720 Trix wide-angle double slip switch. The decoder can be used for the digital formats mfx, Motorola, and D...

For retrofitting 2 C Track turnouts. The turnout lanterns can be used right, left or three-way turnouts. They can be used with a manual hand lever and/or with the 74491 electric turnout mechanism. ...

This is an improved kit for upgrading C Track turnouts. It has a double solenoid mechanism with end shut-off contacts. It can be operated from an accessory controller (example: 72720) or by means o...

This is a kit for converting C Track turnouts. It has a double solenoid mechanism with end shut-off contacts. It can be operated from a 72752 turnout control box with a feedback function or from a ...