|  |
| |
| Item number:
CIEN9-91490117 Manufacturer no.:
ABSF-0201A075 EAN/GTIN:
8718969921541 |
| |
|
| | |
| Ultrafuse ABS Fusion+ made with Polyscope XILOYTM 3D is an engineering filament which has been optimized for 3D-printing.
This special grade has been developed in collaboration with Polyscope Polymers, an expert in enhancing polymer behavior with Styrene Maleic Anhydride (SMA).
Polyscope is renowned for its material solutions in the automotive industry. The properties of ABS Fusion+ are:
- Chemical resistance
- High heat resistance
- Low warping
- Adheres to water-soluble support
- Tough
ABS is a thermoplastic which is used in many applications.
Although ABS has been classified as a standard material in 3D-printing it used to be very challenging to process, until now. We managed to develop an ABS grade which can be directly printed on glass without any fluids or tape and has a higher success rate of prints due to extreme low warping.
To provide users with valuable information we have collected data regarding the mechanical properties of the 3D-printed specimens according to the ISO standards. More information: Features | Printing material | ABSplus | | Printing colours | Neutral | | Brand compatibility | 3D Systems | | Print speed | 40 mm/sec | | Impact strength | 32 kJ/m² | | Flexural modulus | 1406 MPa | | Flexural strength | 48.3 MPa | | Elongation at break | 10.9 % | | Tensile strength | 29.5 kPa | | Print temperature guideline | 240 °C | | Glass transition temperature (min) | 114 °C | Weight & dimensions | Weight | 750 g | | Diameter | 1.75 mm |
|
| | |
| | | |
| |