wago kontakttechnik  (6,465 offers of 2,622,066 product items)

Switching module; with changeover rocker switch; Switching voltage: 250 VAC; Switching current: 6 A; gray

Double-deck terminal block; 4-conductor ground terminal block; PE; with marker carrier; green-yellow housing; internal commoning

h-distribution connector; unidirectional; 1 x plug / 2 x socket; 3-pole; for "flying leads"; with 3rd locking lever

This terminal block is using for connection wires with printed circuit board. Made of polyphthalamide.

Fine adjustment of time within these time ranges can be made with the trimming potentiometer. St+ will only be connected for the function „off‐delay“ with auxiliary voltage.

Switching module; with momentary switch; Switching voltage: 250 VAC; Switching current: 6 A; gray

Self-adhesive marking strips; suitable for terminal strips with pin spacing; 17-32 (400x); computer marked; 100 self-adhesive strips per card; Height of marker strip: 2.3 mm/0.091 in

This terminal block is using for connection wires with printed circuit board. Made of polyphthalamide.

Relay module; Nominal input voltage: 24 VDC; 1 changeover contact; Limiting continuous current: 6 A; Module width: 21 mm; 2,50 mm²; gray

2-conductor through terminal block; suitable for Ex e II applications

End and intermediate plate; 0.8 mm thick

Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; unslotted; galvanized; according to EN 60715

Relay module; Nominal input voltage: 24 VDC; 2 changeover contacts; Limiting continuous current: 6 A; Module width: 23 mm; 2,50 mm²; gray

Component terminal block; 2-conductor; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 1.5 mm²; Push-in CAGE CLAMP; 1,50 mm²; gray