 | | | | |
Picture | | | | Order |
|
|
Gedore 1.30/0 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 50.78*
per piece |
|
|
Gedore 1.30/1 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 49.12*
per piece |
|
|
Gedore 1.30/2 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 46.07*
per piece |
|
|
Gedore 1.30/3 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 49.23*
per piece |
|
|
Gedore 1.30/3N (1 offer) Especially suitable for the safe and trouble-free extraction of needle roller bearings, ball bearings and brass sleeves from crankshafts Note: The soulder of the shell jaw must be applied behind th... |
|
from € 47.70*
per piece |
|
|
Gedore 1.30/4 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 52.68*
per piece |
|
|
Gedore 1.30/4A (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 50.95*
per piece |
|
|
|
|
from € 62.64*
per piece |
|
|
Gedore 1.30/8 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 111.07*
per piece |
|
|
Gedore 1.30/9 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 151.87*
per piece |
|
|
Gedore 1.34/10 (1 offer) Titanium-nitrided surface Multiple wrench size (11 + 13 mm) M10 connecting thread Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out sho... |
|
from € 299.40*
per piece |
|
|
Gedore 1.34/4 (1 offer) For use with sliding hammer no. 1.35/0 or counter-support brace no. 1.36/1 Multiple wrench size (11 + 13 mm) |
|
from € 75.29*
per piece |
|
|
|
|
from € 70.56*
per piece |
|
|
|
|
from € 73.94*
per piece |
|
|
|
|
from € 57.45*
per piece |
|
|
