 | | | | |
Picture | | | | Order |
|
|
|
Gedore 6702350 plier (1 offer) For retaining rings as per DIN 471, DIN 983. DIN 5254 Form B. 90° angled tips. With opening spring. With clamping protection. Forged Gedore chrome-vanadium special hardened and tempered steel. Prec... |
|
from € 17.99*
per piece |
|
|
Gedore 6702430 plier (1 offer) For retaining rings as per DIN 471, DIN 983. DIN 5254 Form B. 90° angled tips. With opening spring. With clamping protection. Forged Gedore chrome-vanadium special hardened and tempered steel. Prec... |
|
from € 17.88*
per piece |
|
|
Gedore 6703080 plier (1 offer) Most popular sizes, packed in environmentally-friendly cardboard box. Particularly suitable for barely accessible places. For internal and external circlip rings. With straight and 90 ° angled tips. |
|
from € 55.94*
per piece |
|
|
Gedore 6702940 plier (1 offer) With V-shaped cutting knife. For stripping single-strand conductors 0.2 - 6.0 mm2. Adjustable stripping length. With wire cutter up to 2 mm. |
|
from € 32.93*
per piece |
|
|
Gedore 7 R 19 (1 offer) Flat pattern UD profile Working angle: 7° from 8 to 15 mm, 6° from 16 to 27 mm and 5° from 30 to 36 mm For ratchet loosening and fast tightening High torque transfer Hollow profile comfortable to h... |
|
from € 21.18*
per piece |
|
|
Gedore 6703320 plier (1 offer) For retaining rings as per DIN 472, DIN 984. DIN 5256 Form C. Straight tips. Forged Gedore chrome-vanadium special hardened and tempered steel. Precision machined, oil hardened and annealed. Black,... |
|
from € 15.60*
per piece |
|
|
Gedore 6703400 plier (1 offer) For retaining rings as per DIN 472, DIN 984. DIN 5256 Form C. Straight tips. Forged Gedore chrome-vanadium special hardened and tempered steel. Precision machined, oil hardened and annealed. Black,... |
|
from € 15.58*
per piece |
|
|
Gedore 7418-02 (1 offer) Forged Chrome-vanadium steel, matt chrome-plated With eject-pin for unlocking Fine-toothed Return angle 7 degrees Max. continuous load of ratchet according to DIN EN ISO 6789:2003 and/or maximum lo... |
|
from € 94.39*
per piece |
|
|
Gedore 6676920 open end wrench (1 offer) Opening at right angle to shaft for maximum accessibility. Gedore vanadium steel 31CrV3, chrome-plated. No. 3114 = Delivery without tommy bar. No. DS 3114 = Delivery with tommy bar 26 D. |
|
from € 31.93*
per piece |
|
|
Gedore 6703670 plier (1 offer) For retaining rings as per DIN 472, DIN 984. DIN 5256 Form C. Straight tips. Forged Gedore chrome-vanadium special hardened and tempered steel. Precision machined, oil hardened and annealed. Black,... |
|
from € 32.10*
per piece |
|
|
Gedore 6707310 plier (1 offer) Acc. to DIN ISO 5746. For heavy continuous use. Good lever action for easy cutting. Induction-hardened precision cutting edges, hardness 62 - 64 HRC. For flat and round material. To cut all wire ty... |
|
from € 25.86*
per piece |
|
|
Gedore 6711930 cable cutter (1 offer) Acc. to DIN ISO 5749. Good lever action for easy cutting. Induction-hardened precision cutting edges, hardness 63 - 65 HRC. For hard wire/piano wire - values see table. Max. cutting capacity Ø 1.4 ... |
|
from € 22.83*
per piece |
|
|
Gedore 6704640 plier (1 offer) For retaining rings as per DIN 472, DIN 984. DIN 5256 Form D. 90° angled tips. Forged Gedore chrome-vanadium special hardened and tempered steel. Precision machined, oil hardened and annealed. Blac... |
|
from € 27.91*
per piece |
|
|
Gedore 6707070 plier (1 offer) Acc. to DIN ISO 5746. For heavy continuous use. Good lever action for easy cutting. Induction-hardened precision cutting edges, hardness 62 - 64 HRC. For flat and round material. To cut all wire ty... |
|
from € 26.68*
per piece |
|
|
Gedore 6724830 cable cutter Hand cable cutter (1 offer) For cutting multi-core copper and aluminium cables up to Ø 27 mm. Not suitable for wire ropes and steel wire. New cutting-edge geometry for a clean, smooth cut. Optimum lever action requires less e... |
|
from € 118.89*
per piece |
|
|
