 | | | | |
Picture | | | | Order |
|
|
|
Gedore 1.14/2 (1 offer) With technical and economical benefits due to the variable clamping reach and automatic grip of the legs Especially suited to removing V-belt pulley wheels and flywheels mounted on longer shafts Up... |
|
from € 80.33*
per piece |
|
|
|
|
from € 23.52*
per piece |
|
|
Gedore 1.30/1 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 49.22*
per piece |
|
|
Gedore R27000003 (1 offer) Pipe wrench 1.1/2" and 2", S-mouth: Design according to DIN 5234 Heavy-duty pattern Mouth position 45° angled Teeth offset against direction of rotation Jaws polished Captive adjusting nut Chrome-v... |
|
from € 63.89*
per piece |
|
|
Gedore 1.15/2 (1 offer) With technical and economical benefits due to the variable clamping reach and automatic grip of the legs Especially suited to removing V-belt pulley wheels and flywheels mounted on longer shafts Up... |
|
from € 118.71*
per piece |
|
|
Gedore R18201000 (1 offer) For quick, reliable removal of stickers, sealing strips and adhesive residues Stable blade holder Blades replaceable Safety cap Single-component handle with hole for hanging up |
|
from € 17.95*
per piece |
|
|
Gedore 1.30/2 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 45.92*
per piece |
|
|
Gedore 1936557 hammer (1 offer) The threaded inserts make the removal of threaded caps, for example, possible, when these possess one threaded hole. No. 1.81/K-1: With sliding hammer 1.35/1, rod 230 mm and impact weight 200 g. No... |
|
from € 131.50*
per piece |
|
|
Gedore 1394355 screwdriver bit (1 offer) Acc. to DIN 7422. Square drive as per DIN 3120 - C 10, ISO 1174, with ball retaining groove. Hand-operated, knurled grip. Chrome-plated. With pressed-in pin in Gedore vanadium special steel, mangan... |
|
from € 14.84*
per piece |
|
|
Gedore 1394320 screwdriver bit (1 offer) Acc. to DIN 2324. Square drive as per DIN 3120 - C 10, ISO 1174, with ball retaining groove. Hand-operated, knurled grip. Chrome-plated. With pressed-in pin in Gedore vanadium special steel, mangan... |
|
from € 17.89*
per piece |
|
|
Gedore 1.30/3 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 50.97*
per piece |
|
|
Gedore 1958070 hammer (1 offer) Suited for the removal of small ball bearings since there is often not enough room for counter-support braces. Can also be used with threaded inserts no. 1.81. |
|
from € 94.80*
per piece |
|
|
Gedore 1.30/3N (1 offer) Especially suitable for the safe and trouble-free extraction of needle roller bearings, ball bearings and brass sleeves from crankshafts Note: The soulder of the shell jaw must be applied behind th... |
|
from € 47.74*
per piece |
|
|
Gedore 1394347 screwdriver bit (1 offer) Acc. to DIN 7422. Square drive as per DIN 3120 - C 10, ISO 1174, with ball retaining groove. Hand-operated, knurled grip. Chrome-plated. With pressed-in pin in Gedore vanadium special steel, mangan... |
|
from € 14.84*
per piece |
|
|
Gedore 1.30/4 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 52.55*
per piece |
|
|
