 | | | | |
Picture | | | | Order |
|
|
|
Gedore 183 10 JC (1 offer) One tool that works like a spanner and pliers DIN ISO 5743 Can replace two complete open-ended spanner sets, metric and inch, gripping size 0 - 52mm/0 - 2" Careful assembly of bolt connections with... |
|
from € 50.95*
per piece |
|
|
Gedore 26 D 8 (1 offer) Acc. to DIN 900 Form A GEDORE vanadium steel 31CrV3, chrome-plated up to Ø 20 mm |
|
from € 6.18*
per piece |
|
|
Gedore 1936328 screwdriver bit (1 offer) Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove. Hand-operated, knurled grip. Chrome-plated. With pressed-in pin in Gedore vanadium special steel, gun-metal finish. Tota... |
|
from € 29.90*
per piece |
|
|
Gedore 1933175 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 57.60*
per piece |
|
|
Gedore 1933256 screwdriver bit (1 offer) Acc. to DIN 7422. Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove. Hand-operated, knurled grip. Chrome-plated . Bit in Gedore vanadium special steel, manganese-phosphated. |
|
from € 11.66*
per piece |
|
|
|
|
from € 9.30*
per piece |
|
|
Gedore 269 K (1 offer) With light-alloy handle and flexible milled file blades 269 K complete with 269 F 9 269 L without milled file blade |
|
from € 106.99*
per piece |
|
|
Gedore 1933272 screwdriver bit (1 offer) Acc. to DIN 7422. Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retaining groove. Hand-operated, knurled grip. Chrome-plated . Bit in Gedore vanadium special steel, manganese-phosphated. |
|
from € 11.62*
per piece |
|
|
Gedore 1830813 wire connector (1 offer) Self-adjusting cutting and stripping tool (No. 8146) for modern electrical installations and equipment circuitry (90 % of all wires can be stripped without any adjustment of the tool). The use of e... |
|
from € 29.82*
per piece |
|
|
Gedore 1953729 tool storage case (1 offer) From eco-friendly tanned cowhide. Carefully processed with strong industrial seams. Base insert from zinc-plated sheet steel. Edges reinforced with aluminium angle brackets, metal parts durable riv... |
|
from € 200.85*
per piece |
|
|
Gedore 1830848 wire connector (1 offer) Self-adjusting cutting and stripping tool (No. 8146) for modern electrical installations and equipment circuitry (90 % of all wires can be stripped without any adjustment of the tool). The use of e... |
|
from € 40.32*
per piece |
|
|
|
|
from € 17.23*
per piece |
|
|
Gedore 1966294 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 19.60*
per piece |
|
|
Gedore 278600 (1 offer) For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391) with 1.0 - 2.0 mm wall thicknesses, composite pipes up to 16 mm as well as bendable stainless steel pipes with... |
|
from € 323.91*
per piece |
|
|
|
|
from € 19.58*
per piece |
|
|
