Ultrafuse PET (previously Innofil3D EPR InnoPET, different name, same high-quality product!) prints as easy as PLA but is much stronger. Available in 10 translucent RAL colours and diameters 1,75 mm
Ultrafuse PET (previously Innofil3D EPR InnoPET, different name, same high-quality product!)is made from a premium, food approved PET (Polyethylene terephthalate).
PET is widely used to produce food and beverage containers and bottles.
This high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.
It has a natural transparent, smooth look. Ultrafuse PET can be 100% recycled. More information: Features | Printing material | Polyethylene terephthalate (PET) |  | Printing colours | Translucent | | Brand compatibility | 3D Systems | | Opacity | Translucent | | Print speed | 40 mm/sec | | Impact strength | 18.4 kJ/m² | | Flexural modulus | 2063 MPa | | Flexural strength | 66.7 MPa | | Elongation at break | 2.7 % | | Tensile strength | 33400 kPa | | Glass transition temperature (min) | 71 °C | | Nozzle temperature | 210 °C | Weight & dimensions | Weight | 750 g | | Density | 1329 kg/m³ | | Diameter | 1.75 mm |
|