Brodit Holder f. Cable Attachment

For Nokia original cable CA-116, CA-113CU and CA-134. Holder for cable plug attachment. To be used with Nokia original cable CA-116 (included in CK-7W), CA-113CU (included in CK-300), or CA-134 (included in CK-100 and CK-600). The cable is easy to attach to the holder. The phone has got the connector for charging on the bottom of the device. The holder offer a firm fit, it is easy to put the phone in the holder and then connect the cable to it. (Cable not included)

Compare the connector in the picture with the connector on your cable in order to find the correct holder. The holder is attached onto a tilt swivel, so it can be adjusted in order to avoid light reflection on the screen. Attach onto a ProClip Mounting Platform. Please read all of the instructions and look at the pictures before attaching the holder.

1. Installation of cable in holder: Place the grooved plate with the groove facing upwards. Place the cable in the groove in the plate and press it all the way into the groove.

2. Place the plate between the tilt swivel and the holder so the holes match. Screw the holder together with the removed screws. The cable is in place.

3. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part.

4. The holder is in place.