Standard Paper, 80g/m2
This high quality base paper is specially developed for use in the CAD and GIS environment. The optimal drying of the media offers the possibility for maximal production. It is the economical choice for the everyday monochrome line work and area fills.
Features:
Dye ink compatible, quick drying, sharp lines, smear resistant.
Applications:
CAD, GIS.
Printing
For optimum results select the best possible print settings. Ink saturation limits can vary due to the ink drop volume and the environmental humidity. Ink saturation levels should be optimized for specific printer, ink and software combinations. Too much ink will cause paper cockle and possible head strike. Longer ink drying times will occur in higher humidity environments.
Lamination
Hot or cold laminating is possible, although cold laminates are preferred because of the better adhesion. Images must be dry before laminating. Too much ink can cause cockling which can cause problems with laminating. For mounting on a board, an encapsulating edge of 5-6mm around the image is recommended. This prevents against moisture and paper splitting because of the tension of the laminate. If the laminate is not spread evenly over the surface of the paper then this can cause curling problems. More information: Features | Media weight | 80 g/m² |  | Printing media thickness | 96 µm | | Opacity | 92 % | Other features | Maximum roll length | 50 m | | Paper dimensions | 914mm x 50m | | Printing material whiteness | 161 | Logistics data | Harmonized System (HS) code | 84439990 |
|