Brodit Holder with Pass-Through Connector

Passive holder with pass-through connector. All cables that can be used with the GPS device can also be used with the holder, for example a charging cable or a TMC cable. When you have attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each time you put the GPS in the holder. You can easily take the device with you when leaving the vehicle. The holder is equipped with a tilt swivel so it can be adjusted in order to avoid light reflection on the screen. Attach onto ProClip Mounting Platform. Please read all of the instructions and look at the pictures before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back. 2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. 3. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the attaching plate. All cables that fit the device, can also be attached to the holder. 4. The holder is in place.