Polymaker PE01009 3D printing material ABS Orange 1 kg

PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing. Which 3D printer can print PolyLite™ ABS? Depending on the size of the models you are trying to print, PolyLite™ ABS can required enclosed 3D printer, or even actively heated chamber. In general a non-enclosed 3D printer with 90˚C bed temperature and 260˚C printing temperature can handle models smaller than fist size. For bigger prints you will required an enclosed 3D printer (~40-50˚C), for models bigger than ~15-20cm in any direction, it will require an actively heated chamber (~70˚C+). Using proper bed adhesion can also help printing larger parts without deformation/warping issue.We can recommend Magigoo or BuildTak as adhesive and bed surface options. Printing and Drying Settings? Printing Temperature: 245˚C - 265˚CBed Temperature: 90˚C - 100˚CPrinting Speed: 30mm/s - 50mm/sFan: OFFDirect Drive:Retraction Distance: 1mmRetraction Speed: 20mm/sIndirect Drive:Retraction Distance: 3mmRetraction Speed: 40mm/sDrying Settings: 70˚C for 6h(Only if the material has absorbed moisture) Can PolyLite™ ABS be post-processed with Acetone? Yes, PolyLite™ ABS can be smoothed with acetone.WARNING: Acetone is a dangerous chemical, please handle it with the necessary safety precautions. We recommend PolySmooth™ as a safer alternative to create smooth surface models.