Ultrafuse PLA (previously Innofil3D PLA, different name, same high-quality product!) prints fantastic and is available in 24 vibrant RAL colors and translucents. Available in 1,75mm and 2,85mm. Ultrafuse PLA (previously Innofil3D PLA, different name, same high-quality product!) is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Ultrafuse PLA gives a smooth printing result. This most used 3D printing material is available in a wide range of RAL colors and translucent variants. When properly cooled, PLA has a higher maximum printing speed, lower layer heights, and sharper printed corners. Combining this with low warping of the print makes it a popular plastic for makers, prosumers and schools. More information: Features | Printing material | Polylactic acid (PLA) |  | Printing colours | White | | Brand compatibility | 3D Systems | | Colour name | Pearl White | | Print speed | 30 mm/sec | | Impact strength | 13.2 kJ/m² | | Flexural modulus | 1860 MPa | | Flexural strength | 98 MPa | | Elongation at break | 4.2 % | | Melting point (min) | 151 °C | | RAL colour (number) | 1013 | | Tensile strength | 34700 kPa | | Glass transition temperature (min) | 61 °C | | Nozzle temperature | 210 °C | Weight & dimensions | Weight | 750 g | | Diameter | 1.75 mm |
|