Brodit Mount with tilt swivel

With your Nextbase in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a big tilt swivel so it is adjustable for avoiding light reflection on the screen. It is easy to put the Nextbase in the holder, and to take it out of the holder. Attach onto ProClip Mounting Platform. Please read all of the instructions and look at the pictures before attaching the monitor mount.

1. Attaching the mount: Place the adapter plate on the back of the monitor so the holes match, as shown in the pictures. Screw the adapter plate into place with the enclosed screws.

2. Loosen the screw in the center of the mount so you can remove the tilt swivel attaching plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the mount over the attaching plate wo the tilt swivel fits. Screw the mount onto the attaching plate.

3. Attaching the monitor: Place the monitor above the headrest mount face plate and press/slide it downward so the face plate hooks into the adapter place on the back of the monitor. To remove the monitor from the mount, press/slide it upward and lift it away from the mount.

4. The mount is in place.