TESA 77904-00000 home storage hook Indoor & outdoor Universal hook Beige 2 pc(s)

Adhesive Screw Triangular for Brick & Stone 5kg
tesa® Adhesive Screw Triangular for Brick & Stone with patented nie wieder bohren. Technology for a secure hold on rough and solid surfaces like brickwork and stone of 5 kg per screw – use multiple screws for heavier objects. They’re shaped to fit unobtrusively behind a variety of common objects that have screw holes in corners or very small backs, like outdoor light fittings, tool racks or brackets. The Adhesive Screws are seriously simple to use, and there are no additional tools required; everything you need is in the pack. And the best bit? They’re removable, too.

- For rough and solid surfaces like brick & stone
- Holds up to 5kg per screw or 10kg using 2 screws
- Alignable to invisibly hide behind the object
- Removable from firm surfaces
- Suitable for indoor and outdoor use

The tesa® Adhesive Screw Triangular for Brick & Stone with patented nie wieder bohren. Technology is designed to give a secure hold on rough and solid surfaces like brickwork and stone. Each screw can handle up to 5 kg – using multiple screws increases the holding power. They’re shaped to fit unobtrusively behind a variety of common objects that have screw holes in the corners. So if you want to mount something like a light fitting, shelf or plant pot on rough and solid surfaces like brick or stone, indoors or outdoors, then look no further.

How to apply – Step by step
- Use a brush to get rid of as much grit or dust as you can from the surface to secure an optimal bond.
- Peel off the protective foil from the adhesive foam tape and lightly press the adhesive screw to the surface. The foam tape is only used to keep the screw in place while you apply the adhesive. Make sure the screw head is aligned so that the body of the Adhesive Screw will be hidden behind your object.
- Pierce the nozzle on the tube of adhesive and pop the key over the other end.
- Squeeze the adhesive into the bigger hole in the screw body by giving the key a twist. Continue until the adhesive begins to come out of the smaller hole and the cavity is filled evenly. Allow 12 hours for the adhesive to dry before you put weight on it.

Wall-mount just about anything on rough surfaces without a drill
It’s always been a kind of a challenge to get screws into surfaces like brickwork and stone. You had to buy or borrow a drill – and specialised masonry drill bits – and make a lot of noise and mess. With the tesa® Adhesive Screw Triangular for Brick & Stone 5 kg you can mount anything up to 5 kg per screw – or 10 kg using two of them – inside or outside without the need for any additional tools. Thanks to their shape, these screws can be aligned so that they’re tucked away neatly behind the object you’re hanging.

Super simple to use – even easier to remove
To remove the screw, get a firm hold on it with a wrench and gently and slowly twist it until the screw comes loose, then pull it away from the wall. Residue can be removed with a glass scraper or a metal brush. Please be aware that the tesa® Adhesive Screws are removable from solid surfaces. If used on sensitive surfaces like plaster, the surface may be damaged.

Please use the Product Finder if you want to mount objects on other surfaces like glass, wallpaper, plaster or tiles and browse our other tesa® Smart Mounting Solutions.
Not suitable for any non-stick materials.