Gigabit Ethernet PoE+ Splitter, 802.3at, 24 W
Integrates Power over Ethernet technology to older non PoE network devices
Benefits:
- Gigabit Ethernet Speed
- Fanless design ensures a quiet operation
- Requires no external power supply unit
- Adjustable output 5V/2A , 9V/2A, 12V/2A
- Support 5.5mm and 3.5mm power jack
The DIGITUS PoE Splitter provide data and power via a single Ethernet Cable to devices, which are not supporting Power over Ethernet. Just connect the input of the Splitter to a PoE Switch or a PoE Injector and the output side to a non-PoE network device such as an access point, IP Phone or a Camera to provide Power and Data. The Extender is self powered by PoE, so there is no additional power supply needed. The output voltage can be regulated via a dip switch to 5V , 9V or 12V. So this Splitter expand your network where you wish to place network device where are no power outlets available.
Technical data:
- Ethernet Speed: 10/100/1000Mbps Gigabit Half/Full Duplex
- PoE Standard: IEEE802.3at
- Input: Power + Data In (RJ45)
- Output: Data Out (RJ45) , DC Out
- Plug-and-Play Installation - No configuration necessary
- Adjustable output 5V/2A , 9V/2A, 12V/2A
- Splits the 48VDC power over RJ45 Ethernet cable into different DC output
- Status LED on the device (PoE ready/ PoE in-use)
- Circuit isolation protection
- Maximum power output up to 24 watts
- Support wide input voltage range 34VDC to 57VDC
- Thermal cut off
- Operating Temperature: 0 to 40°C
- Dimensions (L x W x H): 80 x 55 x 23 mm
- Weight: 80g
- Colour: black
- Ethernet speed: Gigabit
- Industrial usage: false
- Power output: 24 W
- PoE standard: IEEE802.3at (PoE+)
