DIGITUS Gigabit Ethernet PoE+ Splitter, 802.3at, 24 W

Gigabit Ethernet PoE+ Splitter, 802.3at, 24 W

Integrates Power over Ethernet technology to older non PoE network devices

Benefits:

• Gigabit Ethernet Speed
• Fanless design ensures a quiet operation
• Requires no external power supply unit
• Adjustable output 5V/2A , 9V/2A, 12V/2A
• Support 5.5mm and 3.5mm power jack

The DIGITUS PoE Splitter provide data and power via a single Ethernet Cable to devices, which are not supporting Power over Ethernet. Just connect the input of the Splitter to a PoE Switch or a PoE Injector and the output side to a non-PoE network device such as an access point, IP Phone or a Camera to provide Power and Data. The Extender is self powered by PoE, so there is no additional power supply needed. The output voltage can be regulated via a dip switch to 5V , 9V or 12V. So this Splitter expand your network where you wish to place network device where are no power outlets available.

Technical data:

• Ethernet Speed: 10/100/1000Mbps Gigabit Half/Full Duplex
• PoE Standard: IEEE802.3at
• Input: Power + Data In (RJ45)
• Output: Data Out (RJ45) , DC Out
• Plug-and-Play Installation - No configuration necessary
• Adjustable output 5V/2A , 9V/2A, 12V/2A
• Splits the 48VDC power over RJ45 Ethernet cable into different DC output
• Status LED on the device (PoE ready/ PoE in-use)
• Circuit isolation protection
• Maximum power output up to 24 watts
• Support wide input voltage range 34VDC to 57VDC
• Thermal cut off
• Operating Temperature: 0 to 40°C
• Dimensions (L x W x H): 80 x 55 x 23 mm
• Weight: 80g
• Colour: black
• PoE standard: IEEE802.3at (PoE+)
• Ethernet speed: Gigabit
• Power output: 24 W
• Industrial usage: false