| |
|
| Item number: C4276-22123.0116 Manufacturer no.: 22123.0116 EAN/GTIN: 4030618720690 |
| | |
|
| | |
| Index plungers are used for indexing bores. The index plunger with sensor makes it possible to monitor the indexing position of the indexing plunger. When it engages, the sensor already switches after 2/3 of the indexing distance l2. In addition to the electronic signal, the switching status is indicated directly on the sensor via an LED. Material Body Locking pin - Stainless steel 1.4305, nickel-plated
Knob - Thermoplastic PA 6, black, dull
Cable Magnet Sensor - Thermoplastic PA 6, black, dull
Lock nut - Stainless steel A2 (ISO 8675)
Assembly The enclosed separate sensor and sensor clip can be mounted with the enclosed Allen key. The derivation direction of the sensor cable can be determined individually. - Push the sensor into the side of the sensor clip.
- Tighten the internal hexagon screw of the sensor with light hand force (max. 0.1 Nm).
- Clip the sensor clip into the annular groove of the index plunger in any position.
- By turning the sensor clip, the sensor cable's derivation direction can be adjusted.
Note: To avoid interferences, no magnetic fields should act on the index plunger. Operation When using locking index plungers, the knob is pulled-out, turned 90° and secured by a notched catch (when locking pin should not overhang). Notes Knob not removable. Lock nuts have to be purchased separately. More information: | | Nominal dimension: | d1=16 mm / d2=M24 x 2 / l2 min.=20 mm | CE: | Yes | Conflict Minerals free: | Free from Conflict Minerals | Prop65: | Contains Proposition 65 substances | REACH compliant: | Contains SVHC substances >0,1% w/w | RoHS-compliant: | RoHS compliant | d1 [-0.02, -0.05]: | 16 mm | d2: | M24 x 2 | d3: | 33 mm | l1: | 85 mm | l2 min.: | 20 mm | l3: | 38 mm | l4: | 18.5 mm | F1: | 13 N | F2: | 54 N | WS: | 27 mm | Temperature max.: | 75 °C | Temperature min.: | -25 °C | For finish picture: | 2 | Body: | Stainless steel 1.4305 | Cable: | Thermoplastic PUR, black | Knob: | Thermoplastic PA 6, black, dull | Lock nut: | Stainless steel A2 (ISO 8675) | Magnet: | Permanent magnet | Locking pin: | Stainless steel 1.4305, nickel-plated | Sensor: | Thermoplastic PA 6, black, dull | Branch: | adaptions, toll manufacturing | plant, apparatus and equipment construction | rail vehicle construction, rail | plastic / rubber technology | metal construction, metal products | Function: | lock | index | position | rest | latch | readjust | Preferential Origin: | D | Weight: | 313 g |
|
| | |
| | | |
| | | |
| |