HPE Aruba CX 8360-12C - Switch - L3 - Managed - 12 x 100 Gigabit QSFP28 / 40 Gigabit QSFP+ - back to front airflow - rack-mountable - TAA Compliant

General

Features

Flow control, IP-routing, DHCP support, ARP support, VLAN support, IGMP snooping, port mirroring, manageable, IPv6 support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Bidirectional Forwarding Detection (BFD), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Deficit Weighted Round Robin (DWRR), Link Aggregation Control Protocol (LACP), Data Center Bridging (DCB), fan tray, redundant hot swappable fans, congestion control, packet storm protection, Strict Priority (SP), Loopback, Multicast Source Discovery Protocol (MSDP), Ethernet Ring Protection Switching (ERPS), MACsec support, VXLAN tunnel endpoints (VTEP) support, Explicit Congestion Notification (ECN), Bridge protocol data unit (BPDU), Internet Control Message Protocol (ICMP), 32MB packet buffer, Virtual Extensible LAN (VXLAN), Link Aggregation, fast leave, User Datagram Protocol (UDP), Protocol Independent Multicast (PIM), Cisco IOS IP Service-Level Agreements (IPSLA), Rapid Reconfiguration of Spanning Tree (RSTP), broadcast mode, Virtual Switch Extension (VSX), Multicast routing

Processor

1: 1.8 GHz

Compliant Standards

IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1t, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3ba, IEEE 802.1AX

Device Type

Switch - 12 ports - L3 - Managed

Enclosure Type

Back to front airflow rack-mountable 1U

Remote Management Protocol

SNMP, RMON, SNMP 3, SNMP 2c, TFTP, SSH, SSH-2, CLI, SFTP, NTP, ICMP, IPv4, IPv6, RSTP

RAM

16 GB

Capacity

Virtual interfaces (VLANs) per port for 802.1q: 4094

Flash Memory

32 GB

Encryption Algorithm

FIPS 140-2

Routing Protocol

OSPF, EGP, BGP-4, BGP, IGMPv2, IGMP, VRRP, PIM-SM, static IP routing, IGMPv3, GRE, OSPFv3, static IPv4 routing, static IPv6 routing, ECMP, policy-based routing (PBR), MLDv2, MLD, MSTP, RSTP, STP

Authentication Method

Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)

Performance

Switching capacity: 2.4 Tbps ¦ Latency: 1 µs ¦ Throughput: 2 Mbps

Ports

12 x 100 Gigabit QSFP28 / 40 Gigabit QSFP+

Jumbo Frame Support

9KB

Subtype

100 Gigabit Ethernet

Expansion / Connectivity

Interfaces

12 x 100Gbit/40Gbit LAN ¦ 1 x serial (console) ¦ 1 x USB-C console ¦ 1 x LAN RJ-45 ¦ 1 x USB Type A

Manufacturer Warranty

Service & Support

Limited warranty - lifetime

Miscellaneous

Compliant Standards

EMC, ICES-003 Class A, RoHS, Laser Class 1, UL 60950-1, ISO 7779, VCCI Class A, EN 50581:2012, CNS 13438, CSA 22.2 No. 60950-1, EN 61000-3-3:2013, EMC 2014/30/EU, ISO 9296, FCC CFR47 Part 15 A, CNS 13438 Class A, Directive 2014/35/EU, EN 55032:2015, CISPR 32 Class A, EN 61000-3-2:2014 Class A, CISPR 35, EN 60950-1:2006+A1:2010+A11:2009+A2:2013+A12:2011, EN 60825-1:2014, EN 55035:2017, IEC 62368-1: 2014, EN 62368-1:2014 Second Edition, IEC 60825-1:2014 Class 1, IEC60950-1:2005, Second edition + Am1:2009 + A2:2013

Included Accessories

3 fan trays

MTBF

509714 hours

TAA Compliant

Yes

Power

Power Device

Internal power supply - hot-plug

Voltage Required

AC 120/230 V (47 - 63 Hz)

Installed Qty

2

Max Supported Qty

2

Power Provided

550 Watt

Power Redundancy

Yes

Power Redundancy Scheme

N+1

Environmental Parameters

Min Operating Temperature

0 °C

Max Operating Temperature

45 °C

Humidity Range Operating

15 - 95% (non-condensing)

Humidity Range Storage

15 - 95% (non-condensing)

Dimensions & Weight

Width

44.25 cm

Depth

40.64 cm

Height

4.4 cm

Weight

8.01 kg