Industrial ESP32, Ready for Industrial Environments : Arduino and ESP-IDF USB Programmable Industrial ESP32 with OLED Display and din-rail mount. NORVI ENET Series comes with built-in Ethernet. Expanding its connectivity.
NORVI ENET range is the idea choice for ESP32 Ethernet implementations, where industrial level I/O and voltages are present. ESP32 Ethernet provides both Wireless and wired connections to the network. It is designed for protection and reliability. Complying with 2014/30/EU- Electromagnetic Compatibility (EMC) Annex III, Part B, Module C (Conformity to Type Based on Internal Production Control).
- 8x Digital Inputs Dies ist der Inhalt für das figure-Layout-Tag Dies ist die Beschriftung für das figure-Layout-Tag
- 4x 0-20mA Analog Input
- Built in OLED Display
- micro SD card support
- DS3231 RTC with baery backup
- W5500 Ethernet
 | |
Range of product: | NORVI IIOT |
Product type: | Programmable Controller |
Rated supply voltage: | 24V DC |
Discrete input number: | 8 discrete input / 4x 0-20mA Analog Input |
Discrete output voltage: | 24V DC for transisitor output |
Discrete output current: | 0.5A with T0.0... T0.1 Transistor |
Communicaon: | WIFI / Bluetooth |
OLED Display protocol: | I2C |
TFT Display protocol: | SPI |
Analog input range: | 4 - 20mA (AE06-I) / 0 - 10V (AE06-V) |
Analog input resoluon: | 16 bit |
Discrete IO number: | 6 |
Number of Expansions: | ---- |
Supply voltage limits: | 20.4 ..... 28.8V |
Inrush current: | <= 50A |
Power consumption in W: | 32.6 ...... 40.4 with all outputs ON |
Discrete logic Input: | Sink or source |
Discrete input Voltage: | 24V DC |
Voltage TypeVoltage state 1: | > = 15V for Input |
Voltage TypeVoltage state 0: | < = 5V for input |
Discrete Input Current: | 5mA for Input |
Input impedance: | 4.7k Ohm for Input |
Local signalling: | 1 LED green for PWR,1 LED green for RUN, 8 LED green for I0......I7, 6 LED green for T0....T5 |
Electrical connection: | Removable screw terminal block for inputs and outputs (pitch 5.08 mm) |
Mounting support: | Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 rail conforming to IEC 60715 Plate or panel with fixing kit |
Height: | 90.50 mm |
Depth: | 56.60 mm |
Width: | 60.60 mm |
Weight: | 0.43 kg |
Resistance to electrostac discharge: | 4kV on contact 8kV on air |
Resistance to electro magnec fields: | 10 V/m (80 MHz ...... 1GHz) 3 V/m (1.4 MHz ...... 2 GHz) 1 V/m (2 MHz ...... 3 GHz) |
Immunity to microbreaks: | 10 ms |
Relave humidity: | 10....95% without condensation in operation |
IP degree of protection: | IP20 |
Operating altitude: | 0...2000m |
Storage altitude: | 0...3000m |
Shock resistance: | 15 gn for 11 ms |
Gewicht: | 0.4 kg |