Flame Photometer FF-200 Type FF-200D-I

Flame Photometer FF-200
Single channel, low temperature flame photometer for use in industry, medicine and education. Can be operated with propane, butane, natural gas or liquid gas (LPG). With built-in electronic flame failure safety system for operational safety.

-Model FF-200D-I incl. Na, K, Ca, Ba and Li filters
-Model FF-200D-R incl. Na, K and Li filters
-3 year warranty

Supplied with: Na, K, Li filters (model FF-200D-R), additionally Ba and Ca filter (model FF-200D-I), connecting hoses and clips, compressor plug, drain trap, fuses and operating/service instructions
Specifications
Range FF-200D-I:
Range FF-200D-R:
Limits of detection
Na/K:
Li:
Ca:
Ba: 0 ... 199.9 ppm
120 ... 160 ppm Na, 0 ... 10 ppm K

< 0.2 ppm
< 0.25 ppm
< 15 ppm
< 30 ppm
Reproducibility: < 1 % (Coefficient of variation for 20 consecutive samples using 10 ppm Na set to a reading of 50)
Linearity: < 2 % (when concentration of 3 ppm Na/K and 5 ppm Li are set to a reading of 100)
Specificity: Interference from Na, K and Li equal in concentration to test element will be < 0.5 %
Recorder output: Nominal 1.00 V for a reading of 100.0
Air: 6 l/min at 1 Kg/cm2 /14psi (oil and moisture free pressurised air)
Dimensions (W x D x H):
Weight: 420 x 360 x 300 mm
8 kg
Power supply: 190 ... 250 V, 50/60 Hz

Type FF-200D-I