Shore hardness testers, analogue, HB
Shore hardness testers for hardness determination of plastics through penetration measurement
-Typical application: Measurement of penetration depth (Shore).
-Material thickness of the sample, min. 4 mm
-Particularly recommended for internal comparison measurement. Standard calibrations e. g. to DIN 53505 are not possible because of very narrow standard tolerances
-Can be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)
Shore A for rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials
Shore A0 for foams, sponges
Shore D for plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.
Compact handheld durometer for plastics with drag indicator.
-Max mode: Holds the maximum value in the display
-Point mode: Shows one instant value
-Screws to screw on to the TI: M7 fine thread
-Delivered in a plastic carrying case
Specifications
Precision: 3 % of max. measured value
Dimensions (W x D x H): 60 x 25 x 115 mm
Net weight: approx. 160 g
Type HBD 100-0
Measuring range 100 HD HS
Readability 1,0 HD HS |
