Reverse osmosis system LaboStar™ 10 RO DI Type LaboStar™ RO DI 10

Reverse osmosis system, LaboStarä 10 RO DI
The LaboStarä RO DI series produce high quality water with very low energy consumption. The use of "low energy" membranes enable a very efficient and economical operation. All LaboStarä RO DI systems are equipped with a built-in 7 l storage tank. Pure water is collected in the tank and is recirculated by an integrated pump. LaboStarä RO DI is equipped with a final DI cartridge. This cartridge polishes the RO water to Type II quality < 0.1 µS/cm. The unit offers two extraction ports: water can be extracted under pressure from the Point-of-use dispenser or from the outlet on the back of the unit. Optionally, a charged 0.2 µm sterile filter at the dispenser can be used to remove bacteria and endotoxins. An uncharged 0.2 µm sterile filter is also available. The 7 l storage tank capacity can be increased by an additional 30 or 60l tank. Pure water is collected in the tank and is recirculated by an integrated pump. LaboStarä RO DI systems are delivered with the first set of all modules and filters required for immediate operation.
-Pure water circulation right into the dispenser head
-Easy to dispense water using the practical dispenser
-0.2 µm sterile filter with or without endotoxinretention as availableoption
-Whisper operation mode
-Rapid and simple disinfection
-Conductivity monitoring of RO and DI water
-Easy module exchange via quick-release connections
-Small and compact
Specifications
Permeate production rate at 15°C: 10 l/h
Permeat conductivity:
<0.1
Bacteria: 1 KbE/ml (with a 0.2 µm sterile filter)
Particle >0.2: < 1 per ml
Feed water conductivity: < 2000 µS/cm
Silt densitiy index SDI: < 3
Dimensions (W x D x H): 290 x 400 x 535 mm
Power supply: 100-240 V, 50/60 Hz

Type LaboStar™ RO DI 10
Pure water output at 15 °C 10 l / hr
Weight 23 kg