wago kontakttechnik  (6,448 filtered offers of 2,619,108 product items)

Self-adhesive marking strips; suitable for terminal strips with 5 mm pin spacing; 1-12 (300x); computer marked; 100 self-adhesive strips per card

The counter acquires 24V binary pulses and transports the counter status to the installed bus system. The U/D input allows either Up or Down counting. Digital outputs DO 1 and DO 2 can be activated...

3-conductor through terminal block; suitable for Ex e II applications

Relay module; Nominal input voltage: 24 VDC; 1 make contact; Limiting continuous current: 5 A; Red status indicator; Module width: 10 mm.

Universalanschluss für alle Leiterarten - Einmalig kompaktes, 2-reihiges Stecksystem für Leiterquerschnitte bis 1,5 mm2 - Hohe Dichte an “Wire-to-Board”-Verbindungen auf kleinstem Raum - Eine mitti...

Relay module with driven contacts; Nominal input voltage: 24 V AC/DC; 4 break and 4 make contacts; Limiting continuous current: 6 A; Module width: 64 mm; 2,50 mm²; gray

Relay module; Nominal input voltage: 230 VAC; 1 changeover contact; Limiting continuous current: 7 A; Red status indicator; Module width: 15 mm.

Safety relay module; Nominal input voltage: 230 V AC/DC; 2,50 mm2; gray

The counter is used for frequency measurement here, with the pulse period of the 24V signal being measured at the CLOCK input and then converted to a frequency value. Measurement is enabled and inh...

Fieldbus Coupler, Dimensions W x H x D: 51 x 65 x 100 mm, Operating temperature: 0...+55 °C, Communications interface: PROFIBUS DP, D-Sub, Operating voltage: 24 VDC, Series: WAGO 750, Switching cap...

Incremental Encoder Interface, Dimensions W x H x D: 24 x 64 x 100 mm, Operating temperature: 0...+55 °C, Operating voltage: 24 VDC, Series: WAGO 750, Protection rating: IP 20, Termination type: CA...

This terminal block is using for connection wires with printed circuit board. Made of polyphthalamide.

DIN-rail mount PCB carrier, size 2 – mounting foot for DIN-35 rail