Printer Cabinets & Stands (8 items)

Customize Your Lexmark The base provides stability for your printer configuration when the spacer, additional input drawers or feeders are used.

The Spacer cannot be used with the 2100-Sheet Tray. The optional caster base may be required when the product is configured with the spacer or additional trays (1 to 4).

The shelf height in the adjustable stand can vary from a minimum of 6.33 inches (161 mm) from the floor to a maximum of 20.45 inches (519 mm) using 10 shelf slots.

Adds ~ 10 inches (25.4 cm) to height and raises the device for use with a finisher. Extra paper or supplies can be stored inside the cabinet.

The Swivel Cabinet has a top with detent positions that hold it in the proper forward or rear-facing position yet can rotate 90 degrees to facilitate access to the product’s paper path. This cabine...

Customize Your Lexmark The 4.8 inch (12.2 cm) Spacer provides additional height for better access. It is installed below all other drawers. The optional caster base may be required when the product...

The Printer Stand installs below the printer and raises it to the correct height.