Add a touch of pizazz to your digital content with a WD Grip Pack for My Passport Ultra drives. Available in five colors each comes with a grip and matching flat USB 3.0 cable to connect your ideas...
The OpenFlex F3x00 and E3000 is a 3U rack mounted data storage enclosure built on the OpenFlex platform. OpenFlex is Western Digital’s architecture that supports Open Composable Infrastructure (OCI...
The 2.5in SSD Assembly is used to adapt a 2.5" form factor SSD to the 3.5" drive slots in the Ultrastar Data102 drive bays. This allows the enclosure to accommodate high speed SSD drives as its pri...
The 3.5in HDD Assembly is comprised of two parts: the storage drive and the drive carrier. The carrier attaches to the exterior of the data storage drive and caddies the drive into the enclosure. I...
The 2.5" SSD/HDD Enclosure is a stylishly designed aluminum case that can house any 2.5-inch SATA hard drive or solid state drive up to 9.5 mm in height. With a USB 3.1 Gen 1 interface, the StoreJe...
What do you do with the old hard drive removed from your laptop? Don't throw it away, reuse it! Transcend's SSD/HDD Upgrade Kit comes with all the tools you need to reuse the 2.5-inch hard drive re...
Transcend's CM42 and CM80 are enclosures in different form factors designed specifically for M.2 SATA SSDs. By following the step-by-step installation guide, you can transform an M.2 SATA SSD into ...
Transcend's CM42 and CM80 are enclosures in different form factors designed specifically for M.2 SATA SSDs. By following the step-by-step installation guide, you can transform an M.2 SATA SSD into ...
24-bay 2.5" expansion unit for Synology FlashStation Expand your Synology FlashStation1 with Expansion Unit FX2421 for 24 additional 2.5” drive bays whenever needed. Without additional software con...
Easily add 12 bays to your DiskStation With its 12-bay desktop form factor, the DX1215II provides generous storage expansion for Synology DiskStation1 whenever needed with minimal impact on the dep...
10Gb/s Super speed transfer rate MS11 is an USB 3.1 Gen2 Type-C enclosure made for NVMe M.2 solid state drives that is capable of reaching up to 10Gb/s of transfer rate. Aluminum alloy case with th...
MMS02 - Super speed USB 3.1 Gen 2 and SATA 6G interface - Supports 7mm or 9.5mm thick 2.5" SATA hard drives or SSD - Supports UASP (USB Attached SCSI Protocol) for additional performance - Integrat...
USB 3.1 Gen2 Type-C connector with up to 10Gb/s super speed transfer rate - Supports UASP (USB Attached SCSI Protocol) function for even faster performance - Configurable RAID function (RAID 0, 1, ...
Type-C: The Modern Connection The Bolt B75 Pro enclosure is equipped with a Type-C USB port. It's ideal for easily pairing with the latest laptops that are also more commonly equipped with this fea...
Cable wrap-around design Armor A30's bulging silica gels, which are symmetrically built on the outer case, transform into exterior slots for cable to store and wrap around the case. This brilliant ...
Future-Proof Case for 2.5" HDD/SSDs For those who frequently swap or transport hard drives, you will appreciate the advantages of our Quickstore product series: With tool-free installation and a fe...
Regardless of whether it's 2.5 hard drives or Solid State Disks of the same design: The Quickstore Portable Pro offers both types of media modes an elegant housing. In addition, the stylish externa...
With the QuickStore Portable we offer a slim external case for 2.5" SATA HDDs fitting into (almost) any pocket. The hard disk drive (max. 9.5 mm height) can conveniently be installed without any to...
With the QuickStore Portable SHARKOON offers a slim external case for 2.5" SATA HDDs fitting into (almost) any pocket. The hard disk drive (max. 9.5 mm height) can conveniently be installed without...
Transportable, Hardware RAID Powerhouse Ideal Capacities of 24Tb – 80TB for Demanding Production Workflows Available in capacities up to 80TB1, the G-RAID SHUTTLE 4 device delivers high performance...
The Sandberg USB 3.0 to SATA Box 2.5" allows you to connect a SATA hard drive externally to your computer. The hard drive is easy and quick to fit into the box, meaning you can use it within minutes.
The ToughArmor series have proven themselves to be an excellent 2.5” mobile rack solution, and now we are proud to present the external version of the ToughArmor family, the MB991U3-1SB. The MB991U...
Product Description Compatible M.2 drive caddy (tray) for ICY DOCK ToughArmor MB840M2P-B M.2 NVMe SSD to PCIe 3.0 x4 Removable SSD Mobile Rack for PCIe Expansion Slot, as well as the MB852M2PO-B 2 ...
Product Description Compatible hard drive caddy (tray) for ICY DOCK ToughArmor MB834M2K-B & MB833M2K-B M.2 PCIe NVme Mobile Rack for External 3.5" Drive Bay.
The ToughArmor MB699VP-B V3 is a Ruggedized Quad Bay Removable U.2/U.3 NVMe SSD Enclosure supporting PCIe 4.0 and fetching up to 64Gb/s data transfer rates through OCuLink (SFF-8612) interface. It ...
Type-C® for all The small, practical IB-200T-C3 external hard drive enclosure is both down-to-earth and modern. The new USB Type-C® port provides the latest connectivity with solid USB 3.0 technolo...
With the DockingStation IB-180MC-C31 from ICY BOX® you can expand your storage possibilities. It enables you to easily change M.2 NVMe or SATA data media without tools. The DockingStation is connec...
EasySwap Simply convert from M.2 to 2.5'' format. If no M.2 slot is available, an M.2 SSD can still be fitted: just use an existing SATA 22-pin or a 7-pin & 15-pin SATA III connector via our IB-M2S...
A USB 3.2 (Gen 2) enclosure for 2.5" SATA SSDs and HDDs with a height of up to 9.5 mm can be installed here safely and completely without tools. The additional silicone cover protects against damag...
Thanks to the external USB 3.2 Type-C® enclosure IB-1922MF-C32 you can take one NVMe SSD with you easily enough. It allows access to M.2 SSDs of up to 2 TB no matter to which host you connect it. T...
RGB The eight LEDs inside the case provide atmospheric and pulsating colour changes on the desk. And if you don’t want a play of colours, the RGB lighting can simply be turned off thanks to the int...
Long loading times? Not with this ICY BOX®! Waiting is annoying. That’s why it is worth storing and accessing gaming content on M.2 NVMe SSDs. Our ICY BOX® IB-G1826MF-C31 offers the perfect environ...
USB 3.2 (Gen 2x2) Motherboards and external enclosures that support USB 20 Gbps ports are gaining ground even before the new USB 4 standard becomes widely available. If you are keeping up with the ...
Power with style Get the upgrade to take NVMe performance and style to the next level with the IB-1823MF-C31. The enclosure features an LED ring with smooth, stunning transition RGB ambient lightin...
Trust is good, control is better The Kensington Lock support and locks on each HDD tray offer security and protection from accidental removal of the hard drives. They may instead be switched on and...
One in one This Mobile Rack is designed for one 3.5" SATA HDD and fits perfectly into a 5.25" and thus offers a unique space saving solution. The trayless design and Hot Swap make the exchange of H...
Perfect cooling The patented cooling plate transfers the resulting waste heat from the SSD to the housing and cools the SSD down optimally. This prevents the otherwise usual early reduction of the ...
Small and good lookings The IB-182aM2 is a enclosure for a M.2 SSD. It is entirely built of aluminum with a sand-blasted surface. This looks good and gives stability. With a size of only 10x4 cm, i...
Keep it cool The patented cooling plate transfers the resulting heat from the SSD to the housing and cools the SSD optimally. This prevents the early reduction of the transfer rate to protect from ...
Fast on the move With USB 3.1 (Gen 2) Type-C™ even higher data transfer rates can be achieved. The high transfer rate of up to 10 Gbit/s is ensured by the supplied USB 3.1 Type-C™ cable and only ne...
AL - our favourite from the periodic table of the elements Aluminium - the material our accessory dreams are made of. Developed on the computer, melted in the blast furnace and finally milled from ...
Solid and waterproof This external case for a 2.5" SATA hard disk or SSD (maximum 9.5 mm height) protects data against dust and splash water (IP-66 rating). For users who are outside quite often bu...
It’s the mix Apart from the improved design, the advantage of the IB-3740-C31 is that it can support 2.5" and 3.5" drives. This makes the device an ideal candidate for users looking for the maximum...