![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) | ![](/p.gif) |
Picture | | | | Order |
![](/p.gif) |
|
|
Gedore 6576970 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 18.75* per piece |
|
|
Gedore 6057190 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 18.77* per piece |
|
|
Gedore 6068120 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 18.78* per piece |
|
|
Gedore 1966316 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 18.79* per piece |
|
|
Gedore 6057270 open end wrench (1 offer) Acc. to DIN 3118 . Ring 15° offset from shaft. Hexagon gap 30° offset, UD-section at 15° offset. Sizes 8x10 to 12x14 mm with hexagon. Gedore vanadium steel 31CrV3, chrome-plated. * not standardised. |
|
from € 19.62* per piece |
|
|
|
|
from € 20.40* per piece |
|
|
Gedore 1966294 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 20.46* per piece |
|
|
Gedore 6572980 open end wrench (1 offer) Gedore vanadium steel 31CrV3. VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation. Jaw set at 15 °. |
|
from € 21.14* per piece |
|
|
Gedore 6380800 open end wrench (1 offer) ISO 6787, jaw set at 15°. Swedish pattern, roller with left hand thread. With scale. Chrome-vanadium steel. Phosphate finish, polished heads. |
|
from € 21.15* per piece |
|
|
Gedore 6588040 open end wrench (1 offer) Acc. to DIN 895, ISO 3318, ISO 1085. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 34x36 mm, steel-grey up from 36x41 mm and larger. * not standardised. |
|
from € 21.21* per piece |
|
|
Gedore 6573010 open end wrench (1 offer) Gedore vanadium steel 31CrV3. VDE insulation up to 1000 V, acc. to EN 60900/IEC 60900, two-ply Check-Tool insulation. Jaw set at 15 °. |
|
from € 21.97* per piece |
|
|
Gedore 6069520 open end wrench (1 offer) Acc. to DIN 3110, ISO 3318, ISO 1085, ISO 10102. Slim pattern, oval shaft. Gedore vanadium steel 31CrV3, heads finely polished, chrome-plated. * not standardised. |
|
from € 22.72* per piece |
|
|
Gedore 6577000 open end wrench (1 offer) Acc. to DIN 894, ISO 3318. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 38 mm, steel-grey up from 41 mm and larger. Sizes 10 - 135 mm with hanging hole. * not stan... |
|
from € 22.73* per piece |
|
|
Gedore 2171023 open end wrench (1 offer) Acc. to ISO 6787, jaw set at 15°. Swedish pattern, roller with left-hand thread. With scale. The protected mechanism and additional striking face allow light blows to be applied without impairing t... |
|
from € 24.28* per piece |
|
|
Gedore 6381290 open end wrench (1 offer) Acc. to ISO 6787. Jaw set at 15°. Swedish pattern, roller with left hand thread. With scale. Chrome-vanadium steel, chrome-plated, polished heads. |
|
from € 24.28* per piece |
|
|