Scale Model Parts & Accessories (629 items)

Ready-to-install and varnished. The track distances are adjustable. The 3 tracks are electrically insulated. Filigree metal work with stamped rivet imitations. Maximum mast middle distance: 14,5 cm...

For insulated rail joints between two sections of track. Replaces metal rail joiners. 6 pieces per package.

Adapter track for connections to the Arnold* track system. |< 59.0 mm / 2" >|. *ARNOLD is a brand of LIMA S.R.I., Italy.

R1/R2 Curved Turnouts The R1/R2 curved turnout is specially adapted for the curved track in these two radii, i.e. the inner curve on the turnout is the same as Radius 1, the outer curve is the same...

(install on right turnout for below baseboard mounting).

R 2 (228,2 mm / 9,0") - 24°. Circle = 15 sections of track.

R 2 (228,2 mm / 9,0")- 30°. Circle = 12 sections of track.

R 1 (194,6 mm / 7,66") - 30°. Circle = 12 sections track.

|< 27.9 mm / 1-1/8" >|.

|< 50.0 mm / 2" >|.

|< 76.3 mm / 3" >|.

This is a locomotive controller with a 230 volt / 18 VA switched mode power pack. It has four-step speed control for slow acceleration and powerful increases in speed up to the maximum speed. The c...

The uncoupler track comes with a manual hand lever and a built-in electric mechanism. It is compatible with most common European coupler systems. Length 94.2 mm / 3-3/4". It can be used with all NE...

A frame with a buffer beam comes mounted on the track. The rails end in the roadbed. Length 80.5 mm / 3-3/16".

Radius 1114.6 mm / 43-7/8". Curve 12.1°. Complementary curve for the wide radius turnouts. Also suitable for use in constructing sweeping main lines.