| | | | |
Picture | | | | Order |
|
|
|
|
from € 16.40* per set |
|
|
BIM plunge cut saw blade AIZ 10 AB, Metal 20 x 10 mm (1 offer) BIM plunge cut saw blade AIZ 10 AB, Metal 20 x 10 mm; AIZ 10 AB; BIM plunge-cutting saw blade Metal; Flush cutting nails; Filigree adjustment work on non-ferrous profiles; Plunge cuts in plasterboard |
|
from € 8.51* per piece |
|
|
HCS scraper, rigid, ATZ 52 SC 26 x 52 mm (1 offer) HCS scraper, rigid, ATZ 52 SC 26 x 52 mm; ATZ 52 SC; HCS scraper, rigid; Removing mortar or tile adhesive (e.g. when replacing damaged tiles); Removing mortar and concrete residues; Removing hard, ... |
|
from € 8.53* per piece |
|
|
|
|
from € 35.21* per set |
|
|
|
|
from € 46.06* per set |
|
|
|
|
from € 34.50* per set |
|
|
|
|
from € 17.19* per set |
|
|
|
|
from € 13.16* per piece |
|
|
|
|
from € 16.36* per piece |
|
|
|
|
from € 15.66* per piece |
|
|
Bosch ACZ 100 SWB Segmented blade (1 offer) Flush cutting to length of protruding insulation material, especially polystyrene Materials: - Insulation material (e.g. polystyrene) - Soft materials (e.g. cardboard, rubber, leather) |
|
from € 17.21* per piece |
|
|
HM-RIFF thin-kerf segment saw blade ACZ 65 RT 65 mm (1 offer) HM-RIFF thin-kerf segment saw blade ACZ 65 RT 65 mm; ACZ 65 RT; Carbide Technology thin-kerf segment saw blade; Routing extra-thin 1/16" joints on wall tiles; Routing recesses in epoxy/glass fibre ... |
|
from € 20.40* per piece |
|
|
HCS segment saw blade ACZ 85 EC, Wood 85 mm (1 offer) HCS segment saw blade ACZ 85 EC, Wood 85 mm; ACZ 85 EC; HCS segment saw blade Wood, with depressed centre; Plunge cutting in solid wood (e.g. to install a ventilation grille); Flush cutting wood (e... |
|
from € 14.03* per piece |
|
|
|
|
from € 17.19* per piece |
|
|
|
|
from € 8.52* per piece |
|
|
|
|
from € 8.51* per piece |
|
|
Bosch AIZ 32 APB Plunge cut blade (1 offer) Deep plunge cut in wood, abrasive wood materials, plastics Materials: - Sandwich materials - Thin sheet metals - Non-hardened nails and screws |
|
from € 14.06* per piece |
|
|
Bosch AIZ 32 Cutter (1 offer) The Starlock Snap-In mounting system allows fast blade removal and exchange within 3 seconds without having to touch the blade. The mounting system produces the highest power transfer thanks to a 3... |
|
from € 14.00* per piece |
|
|
HCS plunge cut saw blade AIZ 32 EC, Wood 40 x 32 mm (1 offer) HCS plunge cut saw blade AIZ 32 EC, Wood 40 x 32 mm; AIZ 32 EC; HCS plunge-cutting saw blade Wood; Plunge cutting in softwood (e.g. for installing a ventilation grille); Cutting a recess in furnitu... |
|
from € 10.88* per piece |
|
|
HCS scraper, flexible, ATZ 52 SFC 45 x 52 mm (1 offer) HCS scraper, flexible, ATZ 52 SFC 45 x 52 mm; ATZ 52 SFC; HCS scraper, flexible; Removing soft carpet adhesive residues; Removing paint residues; Removing silicone joints |
|
from € 8.55* per piece |
|
|
Bosch AVZ 93 G Sanding Plates for Multi-Tools (1 offer) The Starlock AVZ 93 G sanding plate provides comfortable kickback-free sanding in corners. Its unique design features flexible corners and optimised plate shore hardness, preventing wearing or fusi... |
|
from € 10.85* per piece |
|
|
|
|
from € 17.18* per piece |
|
|
Bosch HCS ATZ 52 SC Scraper (1 offer) Removing mortar or tile adhesive (e.g. when replacing damaged tiles) Materials: - Glue, mortar or tile adhesive - Hard carpet residues |
|
from € 8.55* per piece |
|
|
Bosch HCS ATZ 52 SFC Scraper (1 offer) Removing soft carpet adhesive residues Materials: - Soft carpet residues/adhesive - Putty material - Soft joint material (e.g. silicone) |
|
from € 8.53* per piece |
|
|
|
|
from € 10.88* per piece |
|
|
Bosch Starlock ASZ 32 SC HCS Cutter (1 offer) Cutting flexible abrasive materials (e.g. roofing felt, bitumen shingles) - Cutting soft materials (e.g. carpet, cardboard, PVC floor) - Cutting artificial turf - Turns your multi cutting tool into... |
|
from € 17.17* per piece |
|
|
|
|
from € 3.59* per piece |
|
|
CoreParts MSP511021 multifunction tool attachment (1 offer) Extend the life of your Printers and Copiers. CoreParts offers a wide range of internal parts for printer and Copier, for all major Printer brands that matches the performance of the originals. |
|
from € 11.65* per piece |
|
|
|
|
from € 15.61* per piece |
|
|
|
|
from € 20.41* per piece |
|
|
|
|
from € 17.18* per piece |
|
|
|
|
from € 18.77* per piece |
|
|
|
|
from € 3.94* per 3 pieces |
|
|
|
|
from € 5.77* per piece |
|
|
Dremel 2615990332 multifunction tool attachment (2 offers) Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. |
|
from € 9.82* per piece |
|
|
Dremel 409 (1 offer) For slicing and cutting in metal,wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. Fiberglass reinforced cut-off wheels (456, 426, 426B... |
|
from € 11.54* per piece |
|
|
Dremel 423 (3 offers) For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. |
|
from € 2.30* per packet |
|
|
Dremel 431 (1 offer) For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. |
|
from € 2.31* per piece |
|
|
Dremel 438 (2 offers) For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. |
|
from € 2.30* per piece |
|
|
Dremel 443 (1 offer) Versatile brush for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components. |
|
from € 13.39* per piece |
|
|
Dremel 453 (1 offer) Precision ground for quick, easy sharpening of chain saw blades. Use with Dremel Chainsaw sharpening attachment No. 1453 |
|
from € 6.18* per piece |
|
|
Dremel 454 (1 offer) Precision ground for quick, easy sharpening of chain saw blades. Use with Dremel Chainsaw sharpening attachment No. 1453 |
|
from € 6.17* per piece |
|
|
Dremel 455 (1 offer) Precision ground for quick, easy sharpening of chain saw blades. Use with Dremel Chainsaw sharpening attachment No. 1453 |
|
from € 6.16* per piece |
|
|
Dremel 457 (1 offer) Precision ground for quick, easy sharpening of chain saw blades. Use with Dremel Chainsaw sharpening attachment No. 1453 |
|
from € 6.16* per piece |
|
|
Dremel 520 (1 offer) Impregnated polishing wheel for light stock removal and high luster polishing.Works on various surfaces like steel, aluminium, brass, silver, gold, hard plastic etc. The polishing wheel is impregna... |
|
from € 4.51* per piece |
|
|
Dremel 532 (1 offer) Stainless steel brushes do not cause “after rust” when used on corrosive-resistant materials like pewter, aluminum and stainless steel. |
|
from € 9.03* per 3 pieces |
|
|
Dremel 537 (2 offers) Brass brushes are non-sparking and softer than steel.They will not scratch soft metals like gold, copper, brass. |
|
from € 9.84* per piece |
|
|
Dremel 7122 (1 offer) For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with di... |
|
from € 9.88* per piece |
|
|
Dremel 7134 (2 offers) For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with di... |
|
from € 5.735* per piece |
|
|
Dremel 7144 (1 offer) For fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with di... |
|
from € 14.28* per piece |
|
|
Dremel 8153 (1 offer) Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials. |
|
from € 5.74* per piece |
|
|
Dremel 8215 (1 offer) Te gebruiken voor metaal, gietijzer, lasverbindingen, klinknagels en corrosie. Uiterst geschikt voor slijpen, ontbramen en algemene slijpwerkzaamheden op de meeste materialen. |
|
from € 2.05* per piece |
|
|
Dremel 85602 (1 offer) Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals. |
|
from € 6.99* per piece |
|
|
Dremel 953 (1 offer) Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials. |
|
from € 5.36* per piece |
|
|
Dremel 9934 (2 offers) Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile. |
|
from € 18.11* per piece |
|
|
Dremel 997 (1 offer) Use on metals, castings,welded joints, rivets and rust. Ideal for sharpening, deburring and general purpose grinding of most materials. |
|
from € 6.17* per piece |
|
|
Dremel DSM20 Cutting Guide (DSM840) (1 offer) This attachment helps to enhance the cutting capabilities of the Dremel DSM20. Mitre, bevel and straight cuts are easily achieved in baseboard, trim or molding using the DSM840 Cutting Guide. |
|
from € 13.12* per piece |
|
|
|
|
from € 9.05* per 5 pieces |
|
|
Dremel MS53 (1 offer) Saw blade for cutting soft sheet metal. This blade has 10 teeth per centimeter ensuring excellent cuts. |
|
from € 6.58* per piece |
|
|
|
|
from € 0.52* per piece |
|
|
Dremel Tungsten Carbide Cutter speer tip 3,2 mm (1 offer) Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. |
|
from € 9.85* per piece |
|
|
Fiskars 130000 multifunction tool attachment (1 offer) If you already own a multi tool system from another manufacturer but you have decided to try out the Fiskars QuikFit system, the Fiskars Universal Adaptor allows you to connect a variety of interch... |
|
from € 10.08* per piece |
|
|
Wiha 831-3 Hammer face (1 offer) Material Medium soft caoutchouc (rubber), wear-resistant. Application Tile laying, paving, curbstone setting, dry wall construction, light gardening and landscaping setting tasks. |
|
from € 5.17* per piece |
|
|
Wiha 831-9 Hammer face (1 offer) Meets your requirements White hammer head / very hard: e.g. for building and construction, mould construction, road construction, gardening and landscaping. Material Very hard polyamide (Nylon®), c... |
|
from € 4.57* per piece |
|
|
|
|
from € 35.25* per piece |
|
|
|
|
from € 9.29* per piece |
|
|
|
|
from € 10.09* per piece |
|
|
|
|
from € 7.36* per piece |
|
|
kwb 709642 multifunction tool attachment Scraper (1 offer) For scraping of soft materials, silicone or acrylic joints, residual glue from bonding, paint residues. E.g. removal of residual glue from old floorcoverings, foam carpet backing residue, old or da... |
|
from € 5.79* per piece |
|
|
kwb Floor and installation kit (1 offer) Universal use in carpentry and refurbishment, for example clean flush cuts in parquet, laminate or sound absorbing flooring, precise trimming of doors during laminated floor laying, shortening alum... |
|
from € 25.11* per 4 pieces |
|
|
kwb Universal adapter for Multi-Tool (1 offer) Using the universal adapter, the kbw all-rounder/multi-function accessories fit to many customary multi-cutters, all-rounders or multi-purpose tools: Bosch PMF 180 E, GOP 10.8 V-LI, EINHELL RT-MG 2... |
|
from € 10.08* per piece |
|
|
kwb Universal kit (1 offer) Can be used for all kinds of wood, sanding and repair work. E.g. clean cutting of laminate flooring, or sound-proofing flooring, exact, flush trimming of door frames for laminate floor installation... |
|
from € 32.77* per 17 pieces |
|