Drill Bits (25 items)

Industrial quality, however not as accurate as the collets. With 10mm adapter which fits into the 10mm collet. Includes the chuck key.

All cutters with 6mm shaft. Cutters of Ø 2 - 3 - 4 and 5mm. Double fluted according to DIN 327. Made of HSS. Supplied in wooden box with sliding lid.

4 cutters Ø 6 - 7 - 8 and 10mm. Four flute design according to DIN 844. Shafts 6.0 and 10.0mm respectively. Made of HSS. Supplied in wooden box with sliding lid.

Made of HSS steel. DIN 333 (type A) 60°. Complete set centre drills with sizes of 2.0 - 2.5 and 3.15mm.

Ball-shaped diamond coated grinding bits for glass and stone For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rp...

Ball-shaped diamond coated grinding bits for glass and stone For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rp...

Ball-shaped diamond coated grinding bits for glass and stone For drilling and machining of glass and types of stone reaching to granite. Recommended for use on drill presses with a speed of 2,000rp...

For drilling holes in (semi) precious stones, etc. Shaft Ø 2.35mm.

HSS twist drill in storage case 10-piece set. Similar to DIN 338. Ø 0.3 - 0.5 - 0.8 - 1 - 1.2 - 1.5 - 2 - 2.5 - 3 - 3.2mm. For drilling non-ferrous metal, steel and stainless steel. In labelled cas...

Selected tungsten vanadium steel. Purposely made of stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. For use ...

For working on extremely hard materials: steel, cast steel, non-ferrous metals, plastics. Vibration-free milling of high accuracy dimensions. Ideal for technical work, engraving or milling circuit-...

Rasp cutter of tungsten vanadium with 1/8" (3.2 mm). Ideal for wall tiles, wood, stoneware, plastic and dry wall. Can be use with Tile Cutting Attachment FEX (28756) Shank 3/32" (2.35mm)

These double flute cutters are made from solid tungsten and are to be used for clockwise cutting. The fishtail profile ensures cutting to the center, allowing boring. Usable on steel, cast steel, b...

These double flute cutters are made from solid tungsten and are to be used for clockwise cutting. The fishtail profile ensures cutting to the center, allowing boring. Usable on steel, cast steel, b...

For working on extremely hard materials: steel, cast steel, non-ferrous metals, plastics. Vibration-free milling of high accuracy dimensions. Ideal for technical work, engraving or milling circuit-...

Ideal for use with engraving device GE 70. For machining steel, cast steel, non-ferrous metals, plastics, glass, stoneware and tiles. Nose angle 60° for high stability. Shaft diameter 3.2mm. Not su...

For cutting very hard and brittle materials: glass, porcelain, non-ferrous metals, steel, ceramics, fiberglass and plastics. - Includes Mandrel, Shank Size 3/32" (2.35mm) - Wheels Size 1-1/2" (38mm...

For cutting, grinding and deburring. For cutting very hard and brittle materials: glass, porcelain, non-ferrous metals, steel, ceramics, fiberglass and plastics.. Less heating up due to cooling hol...

For cutting, grinding and deburring. For cutting very hard and brittle materials: glass, porcelain, non-ferrous metals, steel, ceramics, fiberglass and plastics.. Less heating up due to cooling hol...

Manufactured from a one-piece blank in tungsten vanadium steel for highest concentricity, providing breakage safety and long lifetime. For drilling metal, non-ferrous metals, plastic and wood. All ...