| | | | |
| Picture | | | |
|
|
|
|
|
|
from € 14.06* per piece |
|
|
|
|
from € 17.21* per piece |
|
|
PFERD 11273207 file/rasp (1 offer) Rectangular file with different cuts on three sides. Version with tang and ergonomic file handle. Cross cut 1 on front side for roughing, single cut 2 on back side and edge for sharpening. Material... |
|
from € 10.87* per piece |
|
|
PFERD 11273256 file/rasp (1 offer) Rectangular file with different milled cuts, tanged and with ergonomic file handle. Straight cut with chip breaker on front side, radial cut on back side, uncut edges. Suitable for various material... |
|
from € 34.40* per piece |
|
|
PFERD 11274127 file/rasp (1 offer) Triangular files, tapered to the tip with tang. Cut on three sides and three edges. Materials that can be worked: Steels up to 1,200 N/mm² (< 38 HRC) Cast steel Drive types: Manual application |
|
from € 8.50* per piece |
|
|
PFERD 11274157 file/rasp (1 offer) Triangular files, tapered to the tip with tang. Cut on three sides and three edges. Materials that can be worked: Steels up to 1,200 N/mm² (< 38 HRC) Cast steel Applications: Sharpening Drive types... |
|
from € 9.27* per piece |
|
|
PFERD 11275127 file/rasp (1 offer) Triangular files, tapered to the tip with tang. Cut on three sides and three edges. Materials that can be worked: Steels up to 1,200 N/mm² (< 38 HRC) Cast steel Applications: Sharpening Drive types... |
|
from € 9.32* per piece |
|
|
PFERD 11276208 file/rasp (1 offer) Triangular file with knife profile, tanged. Cut on two sides and the narrow edge. Shape G according to DIN 7262. Materials that can be worked: Steels up to 1,200 N/mm² (< 38 HRC) Cast steel Applica... |
|
from € 22.00* per piece |
|
|
PFERD 11277157 file/rasp (1 offer) Triangular files, tapered to the tip with tang. Cut on three sides and three edges. Materials that can be worked: Steels up to 1,200 N/mm² (< 38 HRC) Cast steel Applications: Sharpening Drive types... |
|
from € 10.08* per piece |
|
|
PFERD 11279118 file/rasp (1 offer) Triangular file with knife profile, tanged. Cut on two sides and the narrow edge. Materials that can be worked: Steels up to 1,200 N/mm² (< 38 HRC) Cast steel Applications: Sharpening Drive types: ... |
|
from € 12.39* per piece |
|
|
PFERD 11302252 file/rasp (1 offer) Half-round, curved file body with rasp cut on the half-round side. Strongly curved, half-round profile allows you to work on various radii. Suitable for reworking handrails, ornaments, carved woodw... |
|
from € 47.195* per piece |
|
|
PFERD 11303252 file/rasp (1 offer) File rasp with two half-round, curved ends with rasp cut on the outer radius and file cut on the inner radius. Materials that can be worked: Wood Plastics Soft stones Drive types: Manual application |
|
from € 36.974* per piece |
|
|
PFERD 11690202 file/rasp (1 offer) Rectangular file with cut on two sides. Available in two different cross sections. Suitable for the CHAIN SHARP KSSG chain saw sharpener. Materials that can be worked: Steels up to 1,200 N/mm² (< 3... |
|
from € 7.396* per piece |
|
|
PFERD 11692202 file/rasp (1 offer) Rectangular file with cut on two sides. Suitable for the CHAIN SHARP CS-X chain saw sharpener. Materials that can be worked: Steels up to 1,200 N/mm² (< 38 HRC) Applications: Sharpening Drive types... |
|
from € 72.12* per 10 pieces |
|
|
PFERD 11692203 file/rasp (1 offer) Rectangular file with cut on two sides. Suitable for the CHAIN SHARP CS-X chain saw sharpener. Materials that can be worked: Steels up to 1,200 N/mm² (< 38 HRC) Applications: Sharpening Drive types... |
|
from € 11.63* per piece |
|