Rack Accessories (33 items)

8618.201 Komfortgriff VX für VX, VX IT

For vertical mounting on the threaded bolts of the door, for attaching support strips, punched sections with mounting flanges, 14 x 39 mm, door stay.

The sloping protective roof reliably protects the enclosure from standing moisture and other soiling from above.

Rail for flexible interior configuration of AX compact enclosures in combination with the new AX rail for interior installation. For mounting e.g. VX punched section with mounting flange 23 x 64 mm...

For mounting in the enclosure, no machining required. Suitable for mounting on the sides and roof. Creates additional mounting space e.g. for VX punched section with mounting flange 23 x 64 mm, VX ...

For mounting in the enclosure, no machining required. Suitable for mounting on the sides and roof. Creates additional mounting space e.g. for VX punched section with mounting flange 23 x 64 mm, VX ...

For mounting in the enclosure, no machining required. Suitable for mounting on the sides and roof. Creates additional mounting space e.g. for VX punched section with mounting flange 23 x 64 mm, VX ...

For mounting in the enclosure, no machining required. Suitable for mounting on the sides and roof. Creates additional mounting space e.g. for VX punched section with mounting flange 23 x 64 mm, VX ...

For mounting in the enclosure, no machining required. Suitable for mounting on the sides and roof. Creates additional mounting space e.g. for VX punched section with mounting flange 23 x 64 mm, VX ...

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For component installation outside of the enclosure. Assembly screws included as accessories with the enclosure.

For fixing top hat rails directly onto the rear panel of KX terminal boxes and KX bus enclosures. Creates an additional mounting level with an extra 10 mm of installation depth without having to ma...

To prevent hot-spots inside the enclosure and support the air routing of active enclosure climate control components.

If you need to close existing mounting cut-outs for fan-and-filter units/outlet filters in order to achieve a higher protection category, a blanking cover may be used in the fan-and-filter unit / o...

For ventilation by convection, an outlet filter can be fitted in both the upper and lower sections of the enclosure.

Complete fan unit for tool-free mounting on surfaces. Air throughput from 20 - 900 m³/h, standard protection category IP 54.

If you need to close existing mounting cut-outs for fan-and-filter units/outlet filters in order to achieve a higher protection category, a blanking cover may be used in the fan-and-filter unit / o...

Contact hazard protection including cable duct for side extension of the connection space by 14 mm.

Contact hazard protection including cable duct for side extension of the connection space by 14 mm.

Simply knock out the holes for the cable glands using a screwdriver, IP 66 when mounting in the usual position at the bottom.

Toolless quick assembly: Press the EMC shielding bracket against the cable shield and clip into the rail, diameter changes are compensated in full by the spring.

Lifts the door with heavy installed equipment (e.g. cooling unit) as a closing aid.