Cable Crimpers (11 items)

CS 30: Easy to handle shears, designed for use in electronics but also used for the most desperate tasks. Steel thickness 3.0mm ESD-safe handles version available.

CSP 30/1: Very strong multi-use tool. It can be used as: Shears, Multi-diameter Wire stripper, pliers. ESD-safe handles version available

Very strong multi-use tool that carries out three functions: Shears, Multi-diameter wire stripper and Plier. Length: 174 mm Cutting capacity: 30-20 AWG Wire diameter: Ø 0.81- Ø 2.59 mm

PN 5050/53: Special tool designed to form TO220 component (5 leads). It forms 2-4 leads at 2.54mm pitch. Steel thickness 5.0mm. Tool length 158mm. ESD-safe handles.

PN 5050/54D: Special tool designed to form TO220 component (5 leads). It forms 1-3-5 leads at 2.54 mm pitch. Steel thickness 5.0mm. Tool length 158mm. ESD-safe handles.

PN 5050/6D: Special pliers that enables TO220 component leads to be bent at a 90°angle in a single operation, in such a way that the central lead will be 2.54mm longer than the side leads. It is po...

PNR 30D: Special forming tool that C shapes the component wire. Bent at 45°. Steel thickness 3mm. Tool length 145mm ESD-safe handles

PNR 5000D: A special tool that cuts and forms the component wire in one operation. Length setting is carried out by means of a sliding stop (A min 4 max 16). Steel thickness 5.0mm. Tool length 150m...

PTR 30 CD: Pliers which forms the component wire in a C shape and cuts off the residual part. Residual component lead’s length 3mm. Steel thickness 3.0mm. Tool length 150mm. ESD-safe handles

PTR 30 C/5D: Pliers which forms the component wire in a C shape and cuts off the residual part. Residual component lead’s length 4mm. Steel thickness 3.0mm. Tool length 150mm. ESD-safe handles

PTR 30 LD: Tool that forms the component wire in a L shape and cuts off the residual part. Steel thickness 3.0mm. Tool length 150 mm. ESD-safe handles version