Mounting Kits (4,712 items)

Coding profile, is inserted into the slot on the plug or inverted header, red insulating material

Fixing screw; for 209-120 mounting carrier

Screwable mounts for fixing cable sideways - Ideal for securing large, heavier bundles - Suitable for cable ties up to 4.6 mm wide

Screwable mounts for fixing cable sideways - Ideal for securing large, heavier bundles - Suitable for cable ties up to 4.6 mm wide

Cable binder base, for cable binders up to 5 mm wide, screwable, 3.5 mm fixing hole, 2-sided cable binder feed-through

Cable tie mount - Screw applied, #8 Screw (M4), Bulk package

3M™ Bumpon™ Protective Product SJ5007 is a self-adhesive rubber bumper designed to be used as feet, stops and spacers. The flat top shape provides increased load bearing capacity and better wear re...

Cable binder base, for cable binders up to 4 mm wide, self-adhesive (rubber) and screwable, 4 mm fixing hole, 4-sided cable binder feed-through

SKINDICHT® BLK / BLK-GL, blind plug with PG connection thread, for closing pre-threaded holes

Cable binder base, for cable binders up to 4 mm wide, self-adhesive (rubber) and screwable, 4 mm fixing hole, 4-sided cable binder feed-through

Pitch spacer, for adjusting the pitches between MKDS and GMKDS terminal blocks in mixed rows, 1.25 mm thick

Sealing plugs IP54 with closed sealing membrane, thermoplastic elastomer (TPE), grey, for wall thickness 1.5 - 4.0 mm

Cable binder base, for cable binders up to 6 mm wide, self-adhesive (rubber) and screwable, 4.8 mm fixing hole, 4-sided cable binder feed-through

Attachment bushes, IP54, with open sealing membrane, no lock nuts required

Pitch spacer, raises the pitch by 2.5 mm, interlocks with terminal block of the same shape, color: green

Pitch spacer, raises the pitch by 2.5 mm, interlocks with terminal block of the same shape, color: green

Stepped nipple with closed sealing membrane, can be cut into multiple steps, thermoplastic elastomer (TPE), grey, for wall thicknesses from 1.5 - 4.0 mm

Flange screw for PC 35... connectors

plastic maintaining clamp - for interface relay socket RSZ

Mounting foot; can be snapped on terminal blocks with snap-in mounting foot; for mounting on relay-modules; 6.4 mm wide

Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm tall miniature power relay and solid-state relay

Screwable or self-adhesive versions - 4-way entry for Q-ties - Perfect for combination with Q-ties - Pre-assembly feature - Ensures hold on Q-ties in difficult situations like vertical mounting pos...

Mounting carrier; for isolated mounting on DIN 35 rails

DIN rail adapter, length: 45.7 mm, width: 10.3 mm, height: 12 mm, color: gray

Support bracket, Bracket for busbars, set every 20 cm, length: 116 mm, width: 2.2 mm, height: 46 mm, number of positions: 1, color: blue

Mounting foot; can be assembled on terminal blocks with fixing flange

Cover screw as additional screw, from TK PS/PC 77

Sealing plugs IP54 with closed sealing membrane, thermoplastic elastomer (TPE), grey, for wall thickness 1.5 - 4.0 mm

Double membrane seals, IP66, with two sealing membranes, closed, thermoplastic elastomer (TPE), grey, for wall thicknesses 1.5 - 4.5 mm

DIN rail housing, Filler plug for unoccupied terminal points, width: 16.3 mm, height: 13.67 mm, depth: 19.65 mm, color: light gray (7035)

DIN rail housing, Filler plug for unoccupied terminal points, with vents, width: 21.35 mm, height: 13.67 mm, depth: 33.39 mm, color: light gray (7035)

DIN rail housing, Filler plug for unoccupied terminal points, with vents, width: 21.35 mm, height: 13.67 mm, depth: 33.39 mm, color: black (9005)

DIN rail housing, Filler plug for unoccupied terminal points, with vents, width: 16.3 mm, height: 13.67 mm, depth: 33.39 mm, color: black (9005)

DIN rail housing, Filler plug for unoccupied terminal points, with vents, width: 16.3 mm, height: 13.67 mm, depth: 33.39 mm, color: light gray (7035)