Positioning Bushings ‒ with collar, DIN 172 A | EH 23112. purchased inexpensively from Mercateo

Positioning Bushings, with collar, DIN 172 A | d1=10 mm / l1=20 mm | 23112.0101 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0101

from € 4.20*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=10.1 mm / l1=12 mm | 23112.0103 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0103

from € 4.19*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=10.1 mm / l1=25 mm | 23112.0105 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0105

from € 7.08*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=10.5 mm / l1=20 mm | 23112.0107 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0107

from € 4.55*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=11 mm / l1=12 mm | 23112.0110 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0110

from € 4.19*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=11 mm / l1=25 mm | 23112.0112 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0112

from € 7.01*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=11.1 mm / l1=20 mm | 23112.0114 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0114

from € 4.53*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=11.5 mm / l1=12 mm | 23112.0116 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0116

from € 4.19*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=11.5 mm / l1=25 mm | 23112.0118 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0118

from € 7.00*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=12 mm / l1=20 mm | 23112.0121 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0121

from € 4.55*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=12.1 mm / l1=16 mm | 23112.0123 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0123

from € 4.80*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=12.1 mm / l1=36 mm | 23112.0125 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0125

from € 9.79*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=12.5 mm / l1=28 mm | 23112.0127 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0127

from € 6.79*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=13 mm / l1=16 mm | 23112.0130 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0130

from € 4.80*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=13 mm / l1=36 mm | 23112.0132 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0132

from € 9.78*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=14 mm / l1=28 mm | 23112.0141 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0141

from € 6.80*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=15 mm / l1=16 mm | 23112.0150 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0150

from € 4.79*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=15 mm / l1=36 mm | 23112.0152 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0152

from € 9.79*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=16 mm / l1=28 mm | 23112.0161 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0161

from € 7.88*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=16.1 mm / l1=16 mm | 23112.0163 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0163

from € 8.57*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=16.1 mm / l1=36 mm | 23112.0165 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0165

from € 13.96*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=16.5 mm / l1=28 mm | 23112.0167 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0167

from € 7.89*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=17 mm / l1=16 mm | 23112.0171 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0171

from € 6.10*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=17 mm / l1=36 mm | 23112.0173 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0173

from € 10.64*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=18 mm / l1=28 mm | 23112.0182 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0182

from € 7.88*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=19 mm / l1=20 mm | 23112.0191 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0191

from € 7.88*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=19 mm / l1=45 mm | 23112.0193 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0193

from € 15.76*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=2 mm / l1=9 mm | 23112.0021 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0021

from € 3.50*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=2.1 mm / l1=9 mm | 23112.0023 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0023

from € 3.50*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=2.5 mm / l1=9 mm | 23112.0025 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0025

from € 3.50*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=20 mm / l1=36 mm | 23112.0202 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0202

from € 10.48*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=20.1 mm / l1=20 mm | 23112.0204 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0204

from € 10.48*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=20.1 mm / l1=45 mm | 23112.0206 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0206

from € 20.09*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=22 mm / l1=36 mm | 23112.0222 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0222

from € 10.48*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=25 mm / l1=20 mm | 23112.0251 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0251

from € 10.14*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=25 mm / l1=45 mm | 23112.0253 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0253

from € 18.57*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=3 mm / l1=16 mm | 23112.0032 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0032

from € 6.16*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=3.1 mm / l1=12 mm | 23112.0034 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0034

from € 3.50*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=3.1 mm / l1=8 mm | 23112.0033 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0033

from € 3.22*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=3.5 mm / l1=16 mm | 23112.0038 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0038

from € 6.15*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=30 mm / l1=25 mm | 23112.0301 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0301

from € 15.13*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=30 mm / l1=56 mm | 23112.0303 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0303

from € 27.60*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=4 mm / l1=16 mm | 23112.0042 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0042

from € 6.17*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=4.1 mm / l1=12 mm | 23112.0044 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0044

from € 3.13*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=4.1 mm / l1=8 mm | 23112.0043 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0043

from € 2.94*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=4.5 mm / l1=16 mm | 23112.0048 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0048

from € 5.31*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=5 mm / l1=12 mm | 23112.0051 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0051

from € 3.13*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=5 mm / l1=8 mm | 23112.0050 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0050

from € 2.94*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=5.1 mm / l1=16 mm | 23112.0054 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0054

from € 3.42*
per piece

Positioning Bushings, with collar, DIN 172 A | d1=5.5 mm / l1=10 mm | 23112.0056 (1 offer)

Positioning or drill bushings are used to drill repetitive holes in the same location to ensure repeatabililty. The hardened and ground positioning bushings can be used as wear-resistant guide for ...

Erwin Halder

23112.0056

from € 3.03*
per piece

Positioning Bushings ‒ with collar, DIN 172 A | EH 23112. (138 items)