Wireless Access Point Accessories (97 items)

Ventev's 10.5" x 10.5" x 2.75" Medium Wi-Fi AP Cover - White is specifically designed for indoor use to protect many manufacturers' access points from damage caused by tampering or theft. The enclo...

This product has been tested and validated on Dell™ systems to ensure it will work with your computer. It is supported by Dell™ Technical Support when used with a Dell system.

Dual-Axis Co-Locating Mount for Cisco 2800/3800 Access Points and Wi-Fi Antennas Ventev’s Dual-Axis Co-Locating Mount for Cisco 2800/3800 access points (AP) and antennas simplifies deployments, imp...

This product has been tested and validated on Dell™ systems to ensure it will work with your system. It is supported by Dell™ Technical Support when used with a Dell system.

Power your Dell™ systems with the 20-Watt Power Injector from Dell. This product has been tested and validated on Dell™ systems to ensure it will work with your system. It is supported by Dell™ Tec...

Ventev’s Wi-Fi AP cover for larger APs is constructed of rugged polypropylene and is ideal for concealing and protecting Wi-Fi APs or any networking assets. Designed for indoor use, the cover mount...

This product has been tested and validated on Dell™ systems to ensure it will work with your computer. It is supported by Dell™ Technical Support when used with a Dell system.

This product has been tested and validated on Dell™ systems to ensure it will work with your system. It is supported by Dell™ Technical Support when used with a Dell system.

AP-303H-MNT1 Kit with Spare Single-gang Wall-box Mount Adapter for 303H Series AP

AP-303H-MNT2 Kit with Optional Dual-gang Wall-box Mount Adapter for 303H Series AP

AP-303H-MNTW Kit with Optional Wall Mount Adapter for 303H Series AP

The AP-500H-MNT1 Mount kit may be used to secure a 500H Series access point to a single-gang wall box.

The AP-500H-MNTD is a stand-alone desk mount for the 500H access points.

The AP-505H-MNT2 is designed to secure 505H Series access points to a dual-gang wall box.

AP-515-CVR-20 20-pack for AP-515 with Holes for LED Indicators White Non-glossy Snap-on Covers

A mount bracket kit is used to secure WLAN Access Point.

A mount bracket kit is used to secure WLAN Access Point.

A mount bracket kit is used to secure WLAN Access Point.

A mount bracket kit is used to secure WLAN Access Point.

A mount bracket kit is used to secure WLAN Access Point.

A mount bracket kit is used to secure WLAN Access Point.

A mount bracket kit is used to secure WLAN Access Point.

The AP-MNT-W4 Mount Kit is a low-profile mount kit for attaching APs to a solid, flat surface, such as a wall or the ceiling. The low-profile design means that there will be limited space, about 11...

A mount bracket kit is used to secure WLAN Access Point.

A mount bracket kit is used to secure WLAN Access Point.

A mount bracket kit is used to secure WLAN Access Point.

This product has been tested and validated on Dell™ systems to ensure it will work with your computer. It is supported by Dell™ Technical Support when used with a Dell system.

AP-535-CVR-20 20-pack for AP-535 White Non-glossy Snap-on Covers.

AP-555-CVR-20 20-pack for AP-555 White Non-glossy Snap-on Covers.

Aruba 7008-MNT-19 7008 Rack Mnt

HPE Aruba AP-103H-MNT2 - Network device mounting kit - for HPE Aruba AP-103H

HPE Aruba AP-200-MNT-T - Network device mounting kit - ceiling mountable

Ceiling Tile with Mount Material and Install Guide Mount Kit

HPE Aruba AP-220-MNT-T - Network device mounting kit - ceiling mountable - for HPE Aruba AP-214, 215, 224, 225, 228, 314, 315, 324, 325, 334, 335

HPE Aruba AP-225-CVR-20 - Snap-on cover - white (pack of 20) - for HPE Aruba AP-225, AP-225 FIPS/TAA

Pole/Wall Mount for AP-270 300 mm from vertical mounting asset

Pole/Wall Mount for AP-270 75-mm from vertical mounting asset

The AP-303H-MNTU is designed to protect USB modules that are inserted into the USB port of the AP-303H. A USB module can be inserted directly or with a USB cable extension to ensure fit under the s...

HPE Aruba AP-320-MNT-T - Network device mounting kit - ceiling mountable - for HPE Aruba AP-324, AP-324 FIPS/TAA, AP-325, AP-325 FIPS/TAA; Instant IAP-324, IAP-325

The AP-503H-MNT2 is designed to secure 503H Series access points to a dual-gang wall box.

Kit contains covers for 20 access points.

nanoHD Covers The UniFi nanoHD AP covers allow the nanoHD AP to integrate into a wide variety of backgrounds. Whether you are mounting your AP against a marble, concrete, or wood backdrop, the UniF...

Recessed ceiling mount accessory for the UniFi FLEX HD access point. Mount the UAP-FlexHD to a drop ceiling tile, drywall ceiling or solid ceiling for discreet, low profile appearance. Sliding reta...

nanoHD Covers The UniFi nanoHD AP covers allow the nanoHD AP to integrate into a wide variety of backgrounds. Whether you are mounting your AP against a marble, concrete, or wood backdrop, the UniF...

Ventev's DIN rails are made for Ventev's 24 x 24 x 10" enclosures. Each package comes with two rails and four screws. The DIN rails can be mounted to the bosses in the enclosures or to a backplate.

DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equip...

Ventev's DIN rails are made for Ventev's 10" wide polycarbonate enclosures. Each package comes with two rails and four screws. The DIN rails can be mounted to the bosses in the enclosures or to a b...

ESD Protection for Outdoor High-Speed Networks Introducing the Ethernet Surge Protector, model ETH-SP, from Ubiquiti Networks. The ETH-SP is a cost-effective solution for protecting outdoor Etherne...

nanoHD Covers The UniFi nanoHD AP covers allow the nanoHD AP to integrate into a wide variety of backgrounds. Whether you are mounting your AP against a marble, concrete, or wood backdrop, the UniF...

Ventev’s Hanging Conduit Wi-Fi Access Point Mount allows for Cisco, Aruba and Meraki* wireless access points to mount directly to a conduit hanging from the ceiling. Ideal for environments with hig...

Sturdy and affordable outdoor enclosure for GPeR units. It can be easily mounted on walls and poles. Despite the name, meticulous testing revealed that in real life the enclosure has an IP68 rating...

Large Wi-Fi AP Cover - Clear Ventev’s new Large Wi-Fi Ap Cover is designed for indoor use and accommodates most manufacturers' access points with integrated antennas. The enclosure provides protect...

Ventev's 12 x 12 x 4 in. Wi-Fi AP cover with universal T-Bar mounting plate is specifically designed for indoor use to protect many manufacturers' access points from damage caused by tampering or t...

Ventev's 12 x 12 x 4 in. Wi-Fi AP cover with universal T-Bar mounting plate is specifically designed for indoor use to protect many manufacturers' access points from damage caused by tampering or t...

TerraWave's lightning arrestor is a bi-directional gas discharge tube suppressor that features wide-band operation up to 6 GHz. Simply attach the lightning protector to an access point to help prot...

TerraWave's lightning arrestor is a bi-directional gas discharge tube suppressor that features wide-band operation up to 6 GHz. Simply attach the lightning protector to an access point to help prot...

All-day mobile WiFi. The Nighthawk lithium-ion battery (5040mAh) works with the Nighthawk M1 Mobile Router (MR1100) and M2 Mobile Router (MR2100). Rechargeable and compact to take on the go, you ca...

nanoHD Covers The UniFi nanoHD AP covers allow the nanoHD AP to integrate into a wide variety of backgrounds. Whether you are mounting your AP against a marble, concrete, or wood backdrop, the UniF...

Medium Wi-Fi AP Cover - Clear Ventev's 10.5" x 10.5" x 2.75" Medium Wi-Fi AP Cover is specifically designed for indoor use to protect many manufacturers' access points from damage caused by tamperi...

This product has been tested and validated on Dell™ systems to ensure it will work with your computer. It is supported by Dell™ Technical Support when used with a Dell system.

Single-Axis Co-Locating Mount for Cisco 2800/3800 Access Points and Wi-Fi Antennas Ventev’s Single-Axis Co-Locating Mount for Cisco 2800/3800 access points (AP) and antennas simplifies deployments,...

The Snow Radome Cover is a highly durable snow cover designed to help airFiber 60 LR (AF60 LR) radios withstand harsh winter temperatures and conditions. Manufactured from a single piece of polycar...

Wall mount for an UniFi6 Lite, nanoHD, or AC Lite. The Access Point Lite Arm Mount (UACC Lite AP AM) allows you to mount an UniFi6 Lite (U6 Lite), nanoHD (UAP nanoHD), or AC Lite (UAP AC Lite) to t...

Wall mount for an UniFi6 Pro or AC Pro. The Access Point Pro Arm Mount (UACC Pro AP AM) allows you to mount an UniFi6 Pro (U6 Pro), or AC Pro (UAP AC Pro) to the wall instead of the ceiling.

With the UniFi In-Wall HD Cover, the In-Wall HD AP blends seamlessly into a variety of backgrounds. Available in five different designs and sold as a 3-Pack.

With the UniFi In-Wall HD Cover, the In-Wall HD AP blends seamlessly into a variety of backgrounds. Available in five different designs and sold as a 3-Pack.

With the UniFi In-Wall HD Cover, the In-Wall HD AP blends seamlessly into a variety of backgrounds. Available in five different designs and sold as a 3-Pack.

TerraWave Universal Pole Mount Kit fits TerraWave 12" x 10" and 14" x 12" polycarbonate, fiberglass, Flex-Line Universal Steel enclosures. Flexible for mounting enclosures on to a 15" diameter or l...

TerraWave Universal Pole Mount Kit fits TerraWave 18" x 16" polycarbonate enclosures. Flexible for mounting enclosures on to a 15" diameter or less pole. Includes two adjustable straps to mount up ...

Contains 1x flat surface wall/ceiling mount bracket. Color: black.

Description Ventev's Wi-Fi Right Angle Wall Bracket with Lid is designed to provide optimal Wi-Fi coverage in high-ceiling structures. This bracket can comfortably fit most indoor access points and...

nanoHD Covers The UniFi nanoHD AP covers allow the nanoHD AP to integrate into a wide variety of backgrounds. Whether you are mounting your AP against a marble, concrete, or wood backdrop, the UniF...

The ePMP™ Force 300-13 is a powerful yet affordable subscriber module compatible with the ePMP 3000 Access Point and using the forward compatibility features also interoperates with the ePMP 2000 t...

Cambium Networks ePMP Force 300-19 SM - Wireless bridge - 1GbE - Wi-Fi 5

The ePMP Force 300-19R is a powerful yet affordable subscriber module compatible with the ePMP 3000 and ePMP 2000 to ease the migration into the 802.llac Wave 2 technology. Combining the latest 802...

The quickMOUNT pro is a advanced wall or pole mount adapter for small point to point and sector antennas. The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and ver...