Rack Accessories (64 items)

Shortened (no CMA support) premium full extending rails with out CMA support.

1U/2U Premium Rail AXXPRAIL for use with R1000/R2000 product families

2/4U Premium quality rails with CMA support.

Midplane kit provides additional NVMe front drive bay support for system configurations having more than eight NVMe drives.

2U PCIE/X Riser A2ULPCIXRISER (passive 2xPCI-X and 1x8) for R2000GZ/GL/BB Intel® Server Systems.

Spare fixed 3.5" drive carrier for P4300 server chassis, compatible with 2.5” HDDs/SSDs.

1U Riser3 Retimer Card supporting 2x PCIe* SSD drives, includes cables and drive carriers(for Intel® Server System R100WT family) AXX4PX8HDAIC

Upgrade kit to enable NVM Express for up to four drives in select 1U rack chassis. Included items: - (1) x16 Adapter board, (2) PCIe cables, and (4) lockable drive carriers.

Accessory airduct for the Intel® Server Board S2600WT family and Intel® Server Chassis P4000G family.

12-Gb SAS bridge board accessory for the Intel® Compute Module HNS2600KP and Intel® Compute Module HNS2600TP families

Included Items - (1) 12-Gb SAS bridge board with RAID 5 support. 12-Gb SAS bridge board accessory with RAID 5 for the Intel® Compute Module HNS2600KP and Intel® Compute Module HNS2600TP families.

Rack bezel accessory-Security door for Intel® Server Chassis P4000 in rack configuration. Only includes security door.

Rack bezel kit for converting Intel® Server Chassis P4000 Family pedestal server chassis to rack chassis.

Bracket for securing full length double width graphic cards to fan bulkhead. For use in P4000M chassis.

Bracket kit to support RAID Maintenance Free Backup Units or Intel® RAID Smart Battery AXXRSBBU9 in a 1U or 2U system. Included Items (1) Bracket to support 1U systems: dual height bracket that sup...

Cable management arm for 2/4U Premium Rail AXXFULLRAIL only.

Enhanced Value Rail Kit - Works for all 438mm wide Intel® Rack Chassis 1U, 2U, 4U. Rail allows adjustment within 609.6mm - 765mm to fit difference depth rack. Maximum extension when installed (trav...

IO Module Cable and brackets required when installing an IO Module in the S2600IP or a 2nd I/O module into the S4600LH Intel Server Systems.

1x16 PCI Express Gen 3 (200 pin) rIOM riser and rIOM carrier board kit supporting the Intel I/O module for Intel® Compute Module HNS2600KP and Intel® Compute Module HNS2600TP families for Slot 2.

Upgrade Key to enable Drive Encryption Management for Intel RAID 6G ROC Products.

2U Premium quality rails no cable management arm

Bracket to support up to 3 Battery Backup Units installed

KIT for securing full length GPU cards to fan bulkhead, for use in P4000 chassis

Bezel spare for P4000 server chassis with fixed drives (no door).

3.5 inch hot-swap drive cage kit for the Intel® Server Chassis P4000 family. Included Items (1) 3.5 Inch hot-swap backplane FUP4X35S3HSBP, (4) 3.5 inch hot-swap drive carriers FXX35HSCAR, (1) drive...

2.5 inch hot-swap drive cage kit FUP8X25S3HSDK supporting up to eight drives. Included Items (1) Drive cage, (1) hot-swap backplane, (8) hot-swap drive carriers, (1) I2C cable, (1) power adapter ca...

Pedestal Bezel for the P4304 Chassis with Fixed Drives. Included Items (1) Bezel spare for P4000 server chassis with fixed drives (no door).

Cable kit with two cables to enable fixed SSD and rear drive simultaneously in R2000WT family of products. Included Items - (1) power cable to provide power to rear HDDs and fixed SSDs (1) fan out ...

(1) Kit of 2 cables 245mm length, straight SFF-8087 to SFF-8087 connectors.

Four-port external SAS I/O expansion module.

Spare hot-swap backplane board for the Intel® Server Chassis R1000G family

Spare 1U riser card with 1x16 PCIe Gen 3 slot for the Intel® Server Board S2600WT family. Included Items (1) 1U Riser (1 slot) F1UL16RISER2 and (2) mounting screws.

Hot-swap backplane board spare for 2U chassis with up to 12 3.5 inch drives in the Intel® Server Chassis R2000G family. Included Items (1) Hot-swap backplane board F2U12X35S3HSBP.

1U 1x16 PCI Express Gen 3 riser card supporting in-board low-profile PCIe add-in card for Slot 1 for the Intel® Compute Module HNS2600KP and Intel® Compute Module HNS2600TP families. Included Items...

High current power distibution board spare for Intel® Server Chassis P4000 family.

Chassis maintenance kit for P4000S server chassis - Electrical Parts.

Hot Swap Backplane spare for R1304 1U chassis.

Travel distance 780mm - Kit includes: Rails, screws, installation manual.

1U Short Rail Kit 755mm

This is a supercapitor and flash memory solution; it helps protect the dynamic memory on the Intel RS3 Intelligent RAID products.

Rack handle kit for Intel® Server Chassis R2000G family. Included Items - (1) Set 2U storage rack handles with USB and control panel, (1) cable and adapter board, (1) bag of screws, and (1) set of ...

QLogic Ultra High Performance Leaf - Expansion module - InfiniBand - 4x InfiniBand (QSFP) - 18 ports - for InfiniBand Director Switch 12800-120, 12800-180, 12800-360

3.5" Hot Swap Drive Cage Kit for P4000 Server Chassis.

Power distribution board spare (4U).

Intel Preferred Service - Extended service agreement (renewal) - advance parts replacement - 3 years (from original purchase date of the equipment) - shipment - 24x7 - response time: NBD

Power Distribution Board Spare (Low Current) for P4000 server chassis. Recommend to use with FXX460GCRPS or FXX750PCRPS power supplies.

Intel RAID Activation Key HA2 allows two Intel RAID controllers to provide failover for a two servers in a cluster or shared storage environment.

Spare 3.5 inch hot-swap drive carrier. Included Items - (1) 3.5 Inch hot-swap drive carrier FXX35HSCAR.

SR2500 Intel Local Control Panel (unit contains LCD, buttons, navigation buttons, USB).

RAID Activation Key enables SAS and/or SATA 6 Gb/s Software RAID 0,1,10,5 on most Intel Server Boards.

6Gb/s SAS accessories kit (cable-free) for H2000JF family.

2.5" Drive Carrier.

Hot swap drive carrier spare with black baffle.

Standard control panel. Contains buttons, LEDs, and front USB/video. Compatible with: Intel® Server Chassis SR2500.

Intel Server System SR1680MV - Server - rack-mountable - 1U - 4-way - no CPU - RAM 0 GB - SATA - hot-swap 2.5" bay(s) - no HDD - GigE - monitor: none

Intel Server System SR2612UR - Server - rack-mountable - 2U - 2-way - no CPU - RAM 0 GB - SATA - hot-swap 3.5" bay(s) - no HDD - ServerEngines Pilot II - GigE - monitor: none

Power Distribution Board Spare for P4000XXSFDR chassis.