RJ45 Plug / Clutch & Accessories (22 items)

Connector, 5-position, Plug angled 7/8"-16UNF, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg11, external cable diameter 8 mm ... 10 mm, Contact 3 capacitive

Connector, 4-position, Socket straight M12, A-coded, Spring-cage connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 4 mm ... 8 mm

Sensor/actuator flush-type connector, 4-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M12 thread, with 0.5 m TPE litz wire, 4 x 0.34 mm²

Sensor/actuator flush-type socket, 8-pos. with shield contact, M12 SPEEDCON, rear/screw mounting with M16 thread, with straight solder connection

Used for mounting on shielded Cat5e patch the connector increase the performance, as the cables twisting goes all the way though the connector.

RJ45 plug used for direct mounting on cable with max AWG 24-26. Often used with installation of IP cameras. Suitable for shielded installations.

RJ45 plug used for direct mounting on cable with large AWG size for example Cat6a. Often used with installation of IP cameras. Suitable for both unshielded and shielded installations

RJ45 plug used for mounting on stranded/solid cable. New terminating principle (easy connect) simplifies the terminating by allowing the conductors to be pulled through the front of the connector. ...

Designed to terminate Cat.6A or Cat.7 cable with large diameter. The maximum diameter is 1.45mm so the 23AWG/24AWG cables can go through swiftly and smoothly these ends. NOTE: Only works with Crimp...

RJ45 plug used for direct mounting on cable with large AWG size for example Cat6a. Often used with installation of IP cameras. Suitable for both unshielded and shielded installations