Mounting Kits (346 items)

Mounting plate round. Diameter: 100 mm. Thickness: 9 mm. AMPS-holes + 6 holes. 4 screws + lock washers included. Round mounting plate to be used when you need a larger base for your mounting soluti...

This mount offers an easy and secure way to mount your printer. With quick release MultiMoveClip, it makes it easy to move your printer between locations. Combining functionality and convenience, B...

Locking block for use with item no 216000. Transforms a passive holder into a holder with a locking feature, enables you to lock your Garmin in place in the holder. Two keys included. Made of high ...

Locking block for use with item no 712104 and 713104. Transforms a holder into a holder with a locking feature, enables you to lock your device in place in the holder. Two keys included. Made of hi...

Create your own design by screwing together base/top and extension parts. The angle of the Pedestal Mounts can be changed as needed in steps of 24°, up to a maximum of 192° (8 different positions).

Adjustable Pedestal mount extension part 8". Total length: 232 mm. CC dimension: 202 mm. Includes 1 screw, 1 nut. Black. Create your own design by screwing together base/top and extension parts. Th...

Create your own design by screwing together base/top and extension parts. The extension part can swivel around its own axis. Locked into position using a torx key.

MultiMoveClip: Complete set. Contains 1 MultiMoveClip, 2 adapter plates, 4 screws. MultiMoveClip is for you who easily want to switch between different device holders on the same ProClip. Perfect i...

Single Vesa 75 mm mount, rounded plate. 5 mm Vesa +M4 AMPS holes. A very solid mount for Vesa 75. Compatible with all Brodit Pedestal Mounts. Made of aluminum. Color: black. Made in Sweden.

Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or attach it directly onto the mounting platform. The placement is optimized for touch scr...

The choice for you who want to have your Coyote Nav device installed in a neat and safe way! Within comfortable reach, attached onto the dashboard instead of the windshield providing you clear sigh...

Mounting adapter with tilt swivel and a headrest mount. To be used with Nextbase original Duo Cinema mount. The mounting adapter consists of an adapter plate that is to be attached onto the back of...

Device mounting Female adapter, AMPS-standard holes. To 215053. The Device Mounting Adapter accommodates all Devices/Device Cradles that have the AMPS hole pattern (a square like hole pattern) in t...

Device mounting adapter, Male piece. AMPS-standard holes. Use with item 215053, 215054 or 215055. Device mounting adapter, male piece. Is to be used with item 215053, 215054 or 215055. With this ex...

Horizontal adapter Plate, for Arkon. A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on t...

A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. Attach o...

A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. The moun...

Horizontal adapter plate with tilt swivel, for Arkon. Singel T. A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached ont...

Keep your PNA GPS device in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the device with you when leaving the vehicle. The holder can be ad...

Mounting plate with tilt swivel.

Vertical adapter plate for Arkon. A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the ...

A mounting adapter for devices with Arkon-attachment. The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. The moun...

Mounting adapter with tilt swivel. To be used with Nextbase original Universal Mount. The mounting adapter consists of an adapter plate that is to be attached onto the back of the Universal Mount, ...

A set of two mounting adapters with tilt swivel. To be used with Nextbase original Duo Cinema mount. The mounting adapter consists of an adapter plate that is to be attached onto the back of the Du...

Mounting plate with Richter adapter, with tilt swivel.

Flexible arm, 25 cm. With predrilled AMPS-standard holes. A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to...

Headrest mount for Vesa, fits 75x75mm. Fits headrests with the following measurements between the bars: Min. inner size 123 mm, Max. outer size 183 mm. The headrest mount is to be placed onto the f...

This mounting kit consists of two headrest mounts and a mounting plate. Brodit's headrest mount works as a mounting platform. Combined with the large mounting plate, it provides a very firm and stu...

Perfect for use with all types of forklifts. It will keep everything in easy sight and reach when you need it, and out of the way when you don't! Attach a device holder to the fork lift mount and y...

Forklift mount with heavy duty Pedestal Mount, 10". Fits rods, poles, tubes, plates, pipes with thickness 5-130 mm and width max 87 mm. Length 276 mm + clamp mount. Screws, nuts, washers and Allen ...

Forklift mount with heavy duty Pedestal Mount, 10". Fits rods, poles, tubes, plates, pipes with thickness between 5 mm up to 130 mm. Width between rods: 127 mm. Screws in various lengths, nuts, was...

Forklift mount with heavy duty Pedestal Mount, 4". Fits rods, poles, tubes, plates, pipes with thickness 5-130 mm and width max 127 mm. Length 114 mm + clamp mount. Screws, nuts, washers and Allen ...

Forklift mount with heavy duty Pedestal Mount, 6". Fits rods, poles, tubes, plates, pipes with thickness 5-130 mm and width max 87 mm. Length 164 mm + clamp mount. Screws, nuts, washers and Allen k...

Forklift mount with heavy duty Pedestal Mount, 6". Fits rods, poles, tubes, plates, pipes with thickness between 5 mm up to 130 mm. Width between rods: 127 mm. Screws in various lengths, nuts, wash...

Forklift mount with heavy duty Pedestal Mount, 8". Fits rods, poles, tubes, plates, pipes with thickness 5-130 mm and width max 87 mm. Length 214 mm + clamp mount. Screws, nuts, washers and Allen k...

Forklift mount with heavy duty Pedestal Mount, 8". Fits rods, poles, tubes, plates, pipes with thickness between 5 mm up to 130 mm. Width between rods: 127 mm. Screws in various lengths, nuts, wash...

Perfect for use with all types of forklifts. It will keep everything in easy sight and reach when you need it, and out of the way when you don't. Base can be attached onto rods, poles, tubes, plate...

Perfect for use with all types of forklifts. It will keep everything in easy sight and reach when you need it, and out of the way when you don't. Base can be attached onto rods, poles, tubes, plate...

For GPS remote control Attention! Read all instructions before attaching the ProClip. Peel off both adhesive tape covers on the ProClip. 1. Press the angled edge of the upper part of the ProClip in...

Robust mount. Provides a firm mounting platform for installation of equipment. Mounting plate 42x50 mm with through AMPS holes. Made of high grade ABS/Acetal plastic. Color: Black. Made in Sweden.

Monitor Mount. With tilt swivel. For installation of multimedia monitors in vehicles. The screen mount is placed onto a Brodit headrest mount. The mount comes with a tilt swivel so the monitor can ...

Mount for monitors with a hole underneath for thumb screw attachment ("-thread). With tilt swivel. For installation of multimedia monitors in vehicles. The screen mount is placed onto a Brodit head...

Mounting plate with Tilt Swivel, centered. Low Smaller, lower face plate. The choice for an adjustable monitor angle. Fits monitors with a vertical slot in back.Install onto ProClip.

This mount offers an easy and secure way to mount your printer. Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made mount with a perf...

This mount offers an easy and secure way to mount your printer. Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made mount with a perf...

4-prong male plate. For use with 4-prong female plate for OtterBox uniVERSE tablet cases (sold separately). 50x45x10 mm. AMPS holes.

Keep your tablet installed while driving and you will always have it within easy sight and reach! Tilt swivel mount with 4-prong male plate for use with 4-prong female plate for OtterBox uniVERSE t...

Keep your tablet installed while driving and you will always have it within easy sight and reach! With 4-prong adapter for use with any OtterBox uniVERSE tablet case. Simply slide your tablet into ...

Angled mount for a higher placement. With predrilled holes. The choice when you want to install equipment in a higher position, for example to get the device higher up when installing onto a Consol...

Angled mounting platform, 30°. Attach with adhesive tape to flat, horizontal surface. Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.

Angled mounting platform, 45°. Attach with adhesive tape to flat, horizontal surface. Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.

Angled mounting platform, 60°. Attach with adhesive tape to flat, horizontal surface. Attach with adhesive tape onto a flat, horizontal surface. Perfect e.g. for the boat.

Mount for device with a TMC module. The choice when you want to get a firm installation on a ProClip Mounting Platform instead of using a suction cup mount. You can easily adjust the angle of your ...

Mount for device with a TMC module. The choice when you want to get a firm installation on a ProClip Mounting Platform instead of using a suction cup mount. You can easily adjust the angle of your ...

The fork lift mount can be mounted on square rods, it is perfect for use on fork lifts, in ware houses or other rugged places. Very strong construction that withstands the wear and tear of every da...

High strength angled mount for a higher placement. With predrilled holes. The choice when you want to install fore devices in a higher position, for example to get the device higher up. With predri...

High strength angled mount for a higher placement. With predrilled holes. The choice when you want to install two devices in a higher position, for example to get the device higher up when installi...

Magnetic mount, 43 mm. With ball that fits with standard duty pedestal ball mount arm, item no 202010, 202011, 202012, 202014, 202015, 202016, 202017, 202018, 202019, 202020. Magnetic mount, 43 mm....

Magnetic mount, 88 mm. With ball that fits with standard duty pedestal ball mount arm, item no 202010, 202011, 202012, 202014, 202015, 202016, 202017, 202018, 202019, 202020. Magnetic mount, 88 mm....

This mount offers an easy and secure way to mount your printer. Combining functionality and convenience, Brodit products contribute to an improved working environment. Custom made mount with a perf...

Keep your tablet installed while driving and you will always have it within easy sight and reach! With quick release MultiMoveClip dock for use with any Otterbox uniVERSE tablet case. Simply slide ...

This mount offers an easy and secure way to mount your printer. With quick release MultiMoveClip, it makes it easy to move your printer between locations. Combining functionality and convenience, B...

The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehic...

Fits Coyote New Coyote (For all countries)

The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehic...

Please read all of the instructions and look at the pictures before attaching the mount. 1. Loosen the screw in the center of the mount so you can remove the tilt swivel attaching plate on the back...

Please read all of the instructions and look at the pictures before attaching the mount. 1. Loosen the screw in the center of the mount so you can remove the tilt swivel attaching plate on the back...

The choice for you who want to have your GPS device within easy sight and reach, attached onto a ProClip instead of on a windshield suction mount. You can easily take the device with you when leavi...

The choice for you who want to have your device within easy reach, attached onto a ProClip instead of on the windshield suction mount. You can easily take the device with you when leaving the vehic...

More and more people use navigation units. Keep your unit in a holder attached to the dashboard, and you will always have it within easy reach! You can easily take the unit with you when leaving th...

Used for installation of a display for Bury CC9060 onto a ProClip Mounting Platform instead of onto a vertical surface. You can adjust the display in order to avoid light reflecion. The cable can p...

With your Nextbase in a passive holder attached onto the dashboard it is always within easy reach -safe and convenient. The holder is mounted onto a big tilt swivel so it is adjustable for avoiding...

With MoveClip. Fits for DDS MC1700. Please read all of the instructions and look at the pictures before attaching the mount. 1. Place the monitor with the display facing downwards. Place the mount ...

ABS-plastic, black. 3 mm. 4 à 80x420, 4 à 120x420, 2 à 160x420, 1 à 200x420. Set with sheets of black ABS-plastic, 3 mm thickness. Allows you to make your own special solutions. Consists of: 4 pcs ...

ABS-plastic, black. 5 mm. 4 à 80x420, 4 à 120x420, 2 à 160x420, 1 à 200x420. Set with sheets of black ABS-plastic, 5 mm thickness. Allows you to make your own special solutions. Consists of: 4 pcs ...

Set with sheets of black ABS-plastic, 5 mm thickness. Allows you to make your own special solutions.

Adapter plate for LCD-screen without groove in backside, for ProAdapt. The choice when you want to install a monitor without a vertical slot on the back (with a hole underneath for thumb screw atta...

Adjustable top support for a firmer fit. Adjustable top support, for a safer more secure mounting. The top support helps holding your unit into place in the holder. The support is adjustable in ord...

Attaching mount, adjustable sideways and in height, and tilts. TomTom Go has been available for some time now, and it is a big success! Keep your unit in a holder attached to the dashboard, and you...

Cover plate to be placed in compartment in the console to the left in Chevrolet Trans Sport 97- .

Female cigg-plug with open ends for fixed installation. Cigarette lighter socket with open ends for fixed installation. Is to be used when you want to use an active holder with cigarette lighter pl...

Flexible arm, 15 cm. With predrilled AMPS-standard holes. A flexible arm with AMPS plates in both ends. For installation of monitors, printers and other heavier devices in busses, trucks etc. Is to...

Fuse 2 A, with holder. Can be used with Brodit active holders for fixed installation, e.g. holders with Molex adapter system, holders with speaker or Handsfree Car Kit.

A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With an angled, thin end. Made in black ABS plastic.

A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With thin ends, one pointy and one level end. Manufacutred in black ABS plastic.

A tool that makes installations easier, used e.g. to press into gaps in the interior in order to widen them. With a thin end. Made in black ABS plastic.

Robust and strong mount with hinge-function. Enables for installation of an addition device in front of the screen in your car while remaining the access to the screen. First you attach the hinge m...

Michrophone, 3,5 mm plug. 3 m cable. Michrophone for Handsfree Car Kit. 3,5 mm plug. 3 m cable. It is easy to attach the microphone to the Handsfree Car Kit, and then to attach it in the desired po...

The Vesa mounting plate enables you to mount your monitor onto a Pedestal Mount solution. The mounting plate has M4 AMPS-standard holes fitting onto all top parts for adjustable Pedestal Mounts.

Mounting plate, with tilt swivel. Attention! Read all instructions before attaching the holder. 1. Loosen the screw in the center of the holder so you can remove the attaching part on the back. 2. ...

Note-pad holder with tilt swivel. Holder for note pad, with tilt swivel. Attach onto ProClip Mounting Platform. (Note pad and pen are not included.) Attention! Read all instructions before attachin...

Note-pad holder with tilt swivel. Note-pad and pen included. Holder for note pad, with tilt swivel. Attach onto ProClip Mounting Platform. Note pad and pen included. Attention! Read all instruction...

When attaching a ProClip device holder or Pedestal Mount to a vehicle dashboard or other surface which lacks sufficient structural integrity to provide a stable mounting platform, we highly recomme...

Self tapping screws for ABS plastic, used when making own special mounting solutions.