| | | | |
Picture | | | | Order |
|
|
|
Gedore 1.30/8 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 111.11* per piece |
|
|
Gedore 1.30/9 (1 offer) Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extract... |
|
from € 151.62* per piece |
|
|
Gedore 1.34/10 (1 offer) Titanium-nitrided surface Multiple wrench size (11 + 13 mm) M10 connecting thread Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out sho... |
|
from € 299.00* per piece |
|
|
Gedore 1.34/4 (1 offer) For use with sliding hammer no. 1.35/0 or counter-support brace no. 1.36/1 Multiple wrench size (11 + 13 mm) |
|
from € 75.73* per piece |
|
|
|
|
from € 41.21* per piece |
|
|
Gedore 1.72/4 (1 offer) For the simple and damage-free removal of ball pins on track rods and push rods |
|
from € 77.17* per piece |
|
|
|
|
from € 68.97* per piece |
|
|
Gedore 2329034 socket wrench (1 offer) Using the extension between cross-beam and leg the clamping reach can be extended indefinitely. Forged from one piece. Leg brake for more safety. |
|
from € 37.88* per piece |
|
|
|
|
from € 75.34* per piece |
|
|
Gedore 6457960 hammer (1 offer) With ergonomic ash handle (E-261 E). Made from hardened and tempered steel to EN 10083. Enamelled blue, with ground faces. |
|
from € 39.51* per piece |
|
|
Gedore 6462020 anvil (1 offer) Made from hardened and tempered steel to EN 10083. Enamelled, with ground faces. |
|
from € 52.56* per piece |
|
|
|
|
from € 6.94* per piece |
|
|
|
|
from € 90.39* per piece |
|
|
|
|
from € 6.18* per piece |
|
|
Gedore 1.81/1 (1 offer) No. 1.81/1: For sliding hammers 1.35/1, 1.35/2, counter-support brace 1.36/1 No. 1.81/2: For sliding hammers 1.35/2, 1.36/2, counter-support brace 1.36/3 No. 1.81/2: For slide hammer No. 1.35/2, 1.... |
|
from € 60.96* per piece |
|
|