 | | | | |
Picture | | | | Order |
|
|
Gedore 1958070 hammer (1 offer) Suited for the removal of small ball bearings since there is often not enough room for counter-support braces. Can also be used with threaded inserts no. 1.81. |
|
from € 94.44*
per piece |
|
|
Gedore 8039010 open end wrench (1 offer) For accessing bolts in cramped and hard-to-reach locations, easy to change. Forged. Chrome-vanadium steel, matt chrome-plated. With eject-pin for unlocking. |
|
from € 86.14*
per piece |
|
|
Gedore 1576143 hammer (1 offer) Head and handle forged in one piece, nearly unbreakable. Ergonomic, air-cushioned 2-component handle. Optimum impact force - a result of its perfect balance. Fatigue-free working due to the new ant... |
|
from € 50.94*
per piece |
|
|
Gedore 1603299 hammer (1 offer) Reduced expense due to versatile use as an engineer’s and recoilless hammer. Universal use for service and assembly work. With all advantages of a recoilless hammer with higher impact. Less energy ... |
|
from € 31.92*
per piece |
|
|
Gedore 1603396 hammer (1 offer) Reduced expense due to versatile use as an engineer’s and recoilless hammer. Universal use for service and assembly work. With all advantages of a recoilless hammer with higher impact. Less energy ... |
|
from € 36.18*
per piece |
|
|
|
|
from € 160.27*
per piece |
|
|
|
|
from € 26.70*
per piece |
|
|
|
|
from € 16.40*
per piece |
|
|
Gedore 2950529 tool storage case (1 offer) Can be used together with the Gedore BOXX®-system. Especially suitable for small tool sets. Also usable as small parts box, incl. divider set. Dimensions: W 260 x D 155 x H 63 mm. Two L-BOXX® Minis... |
|
from € 17.95*
per piece |
|
|
Gedore 8805740 metalworking chisel (1 offer) Acc. to DIN 7254 Form A. Chrome-molybdenum-vanadium air hardening steel 45CrMoV7. Carefully hardened and tempered along the full length. Striking heads inductively tempered. Working edge polished a... |
|
from € 19.57*
per piece |
|
|
|
|
from € 7.74*
per piece |
|
|
Gedore 2963515 tube/pipe bending tool (1 offer) Sizes from 3 to 10 mm up to 180°. For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391) with 0.75 - 2.0 mm wall thicknesses, composite pipes up to 16 mm as well as ... |
|
from € 10.12*
per piece |
|
|
Gedore 8745310 hammer (1 offer) Forged hammer head DIN 1042. Spare handles complete with steel sleeve, tapered collar, fixing plate and wood screw. Hickory handle DIN 5112, with additional long and hardened steel sleeve. ROTBAND-... |
|
from € 13.18*
per piece |
|
|
|
|
from € 20.43*
per piece |
|
|
|
|
from € 15.58*
per piece |
|
|
Gedore 227 E-2 (1 offer) DIN 5128-60, 60 Shore A With two flat surfaces With ash handle |
|
from € 18.71*
per piece |
|
|
Gedore 1687883 hammer (1 offer) Reduced expense due to versatile use as an engineer’s and recoilless hammer. Universal use for service and assembly work. With all advantages of a recoilless hammer with higher impact. Less energy ... |
|
from € 49.35*
per piece |
|
|
|
|
from € 52.60*
per piece |
|
|
|
|
from € 62.42*
per piece |
|
|
|
|
from € 65.71*
per piece |
|
|
Gedore 8783240 hammer (1 offer) With very robust and durable steel tube handle. Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C. Powder-coated with silver hammer-effect enamel. |
|
from € 114.90*
per piece |
|
|
Gedore 6460400 hammer (1 offer) With ergonomic ash handle (E-251 E). Made from hardened and tempered steel to EN 10083. Enamelled blue, with ground faces. The K models have one milled cross-hatched face and one smooth square face. |
|
from € 47.65*
per piece |
|
|
Gedore 6460590 hammer (1 offer) With ergonomic ash handle (E-251 E). Made from hardened and tempered steel to EN 10083. Enamelled blue, with ground faces. The K models have one milled cross-hatched face and one smooth square face. |
|
from € 60.79*
per piece |
|
|
Gedore 6461480 hammer (1 offer) With ergonomic ash handle (E-251 E). Made from hardened and tempered steel to EN 10083. Enamelled blue, with ground faces. |
|
from € 57.54*
per piece |
|
|
|
|
from € 8.55*
per piece |
|
|
|
|
from € 80.80*
per piece |
|
|
Gedore 8586250 hammer (1 offer) Forged hammer head DIN 1041. With ash (E 4 E) or hickory handle (E 4 H) to DIN 5111. |
|
from € 14.09*
per piece |
|
|
|
|
from € 15.60*
per piece |
|
|
|
|
from € 44.46*
per piece |
|
|
Gedore 8582770 hammer (1 offer) Forged hammer head DIN 1041. With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve. The tapered collar, fixing p... |
|
from € 51.19*
per piece |
|
|
Gedore 8582260 hammer (1 offer) Forged hammer head DIN 1041. With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve. The tapered collar, fixing p... |
|
from € 21.98*
per piece |
|
|
|
|
from € 56.07*
per piece |
|
|
Gedore 8587490 hammer (1 offer) Forged hammer head DIN 1041. The edges of the flat side of the head are induction hardened. With contoured hickory handle DIN 5111, additionally shaped with a long hardened handle protective steel ... |
|
from € 44.41*
per piece |
|
|
Gedore 8587570 hammer (1 offer) Forged hammer head DIN 1041. The edges of the flat side of the head are induction hardened. With contoured hickory handle DIN 5111, additionally shaped with a long hardened handle protective steel ... |
|
from € 51.16*
per piece |
|
|
|
|
from € 26.72*
per piece |
|
|
|
|
from € 34.54*
per piece |
|
|
|
|
from € 36.18*
per piece |
|
|
|
|
from € 74.06*
per piece |
|
|
Gedore 8746550 hammer (1 offer) Forged hammer head DIN 1042. Spare handles complete with steel sleeve, tapered collar, fixing plate and wood screw. Hickory handle DIN 5112, with additional long and hardened steel sleeve. ROTBAND-... |
|
from € 110.79*
per piece |
|
|
|
|
from € 27.48*
per piece |
|
|
|
|
from € 29.08*
per piece |
|
|
Gedore 8887290 hammer (1 offer) Forged head DIN 6475. Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve. The sleeve, tapered collar, fixing plate and woo... |
|
from € 37.65*
per piece |
|
|
Gedore 8887370 hammer (1 offer) Forged head DIN 6475. Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve. The sleeve, tapered collar, fixing plate and woo... |
|
from € 27.40*
per piece |
|
|
Gedore 1985094 hammer (1 offer) Club shape. With hickory handle DIN 5111, with additional long hardened handle protective steel sleeve. Spare handle E 600 H / E 609 H. The sleeve, tapered collar, fixing plate and wood screw bond ... |
|
from € 364.47*
per piece |
|
|
|
|
from € 78.92*
per piece |
|
|
Gedore 8684420 hammer (1 offer) Forged hammer head DIN 1041. With ash (E 4 E) or hickory handle (E 4 H) to DIN 5111. |
|
from € 15.67*
per piece |
|
|
|
|
from € 17.23*
per piece |
|
|
Gedore 8671950 hammer (1 offer) Forged hammer head DIN 1041. With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve. The tapered collar, fixing p... |
|
from € 27.49*
per piece |
|
|
|
|
from € 22.74*
per piece |
|
|
|
|
from € 25.19*
per piece |
|
|
Gedore 8690900 hammer (1 offer) Forged hammer head DIN 1041. With ash (E 4 E) or hickory handle (E 4 H) to DIN 5111. |
|
from € 21.26*
per piece |
|
|
Gedore 1.35/1 (1 offer) Suited for the removal of small ball bearings since there is often not enough room for counter-support braces Can also be used with threaded inserts no. 1.81 |
|
from € 29.13*
per piece |
|
|
Gedore 8581960 hammer (1 offer) Forged hammer head DIN 1041. With contoured ash (E 600 E) or hickory (E 600 H) handle DIN 5111, additionally shaped with a long hardened handle protective steel sleeve. The tapered collar, fixing p... |
|
from € 17.14*
per piece |
|
|
|
|
from € 22.72*
per piece |
|
|
Gedore 8596480 hand tool shaft/handle/adapter (1 offer) Ash (E 600 E) or hickory (E 600 H) DIN 5111. With hardened handle protective steel sleeve, tapered collar, fixing plate and wood screw. With this standard wooden handle, according to DIN 5111 it is... |
|
from € 10.66*
per piece |
|
|
|
|
from € 34.54*
per piece |
|
|
|
|
from € 25.86*
per piece |
|
|
Gedore 8783160 hammer (1 offer) With very robust and durable steel tube handle. Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C. Powder-coated with silver hammer-effect enamel. |
|
from € 29.75*
per piece |
|
|
|
|
from € 25.95*
per piece |
|
|
|
|
from € 10.87*
per piece |
|
|
Gedore 2936828 mechanics tool set (1 offer) Suitable for tradesmen. A selection of essential tools. With Check-Tool insert for quick check of completeness. 1100 CT2-01 to retrofit existing L-BOXX®es 136. |
|
from € 10.08*
per piece |
|
|
Gedore 2963531 tube/pipe bending tool (1 offer) Sizes from 10 to 22 mm Ø up to 90°. For soft copper pipes EN 1057 up to 22 mm (also heat-insulated), composite pipes up to 20 mm as well as precision steel pipes EN 10305-3 (DIN 2394) up to 18 x 1.... |
|
from € 11.67*
per piece |
|
|
|
|
from € 14.81*
per piece |
|
|
|
|
from € 32.03*
per piece |
|
|
|
|
from € 34.42*
per piece |
|
|
|
|
from € 35.38*
per piece |
|
|
|
|
from € 44.32*
per piece |
|
|
Gedore 248 ST-45 (1 offer) With very robust and durable steel tube handle Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C Powder-coated with silver hammer-effect enamel |
|
from € 44.46*
per piece |
|
|
Gedore 2963469 hammer (1 offer) With hickory handle. Splinter-proof, shatter-proof and wear-resistant polyamide heads, 75 Shore D, tested to -20° C. Powder-coated with silver hammer-effect enamel. |
|
from € 25.87*
per piece |
|
|
|
|
from € 31.97*
per piece |
|
|
Gedore 8868740 riveter (1 offer) Acc. to DIN 6434. Chrome-molybdenum-vanadium air hardening steel 45CrMoV7. Working edge polished and clear varnished. |
|
from € 38.51*
per piece |
|
|
Gedore 8887450 hammer (1 offer) Forged head DIN 6475. Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve. The sleeve, tapered collar, fixing plate and woo... |
|
from € 28.25*
per piece |
|
|
Gedore 8887610 hammer (1 offer) Forged head DIN 6475. Contoured ash (E 620 E) or hickory handle (E 620 H) DIN 5135, supplementary with long hardened handle protective steel sleeve. The sleeve, tapered collar, fixing plate and woo... |
|
from € 39.34*
per piece |
|
|
Gedore 8612000 hammer (1 offer) Forged hammer head DIN 1042. With ash (E 9 E) or hickory handle (E 9 H) DIN 5112. |
|
from € 49.36*
per piece |
|
|
|
|
from € 127.18*
per piece |
|
|
Gedore 8614480 hammer (1 offer) Forged hammer head DIN 1042. With practically unbreakable fibreglass handle, with secured head. |
|
from € 135.61*
per piece |
|
|
Gedore 8614560 hammer (1 offer) Forged hammer head DIN 1042. With practically unbreakable fibreglass handle, with secured head. |
|
from € 155.63*
per piece |
|
|
|
|
from € 24.38*
per piece |
|
|
Gedore 2964015 manual pipe cutter (1 offer) To cleanly cut multi-layer composite pipes or other plastic pipes. Cutting wheel changeable without tools. With retractable deburring tool, spare cutting wheel in handle. No. 2270 5 with adjustable... |
|
from € 5.79*
per piece |
|
|
|
|
from € 7.75*
per piece |
|
|
|
|
from € 2.21*
per piece |
|
|
|
|
from € 4.48*
per piece |
|
|
Gedore 8822830 hand tool shaft/handle/adapter (1 offer) Hickory handle DIN 5112. Steel sleeve, fixing plate, tapered collar and wood screw. For all hammer heads according to DIN 1042. With this handle, every standard DIN hammer head can be converted to ... |
|
from € 4.47*
per piece |
|
|
|
|
from € 5.41*
per piece |
|
|
|
|
from € 9.30*
per piece |
|
|
|
|
from € 4.47*
per piece |
|
|
|
|
from € 9.30*
per piece |
|
|
|
|
from € 9.29*
per piece |
|
|
|
|
from € 9.31*
per piece |
|
|
|
|
from € 6.17*
per piece |
|
|
|
|
from € 6.17*
per piece |
|
|
|
|
from € 7.33*
per piece |
|
|
|
|
from € 9.31*
per piece |
|
|
|
|
from € 3.38*
per piece |
|
|
Gedore 8589000 hand tool shaft/handle/adapter (1 offer) Ash (E 600 E) or hickory (E 600 H) DIN 5111. With hardened handle protective steel sleeve, tapered collar, fixing plate and wood screw. With this standard wooden handle, according to DIN 5111 it is... |
|
from € 8.54*
per piece |
|
|
Gedore E 600 E-200 Wood 280 mm Hand tool shaft (1 offer) With hardened handle protective steel sleeve, tapered collar, fixing plate and wood screw With this standard wooden handle, according to DIN 5111 it is possible to convert even ordinary hammer head... |
|
from € 8.51*
per piece |
|
|
Gedore E 600 H-100 Wood 260 mm Hand tool handle (1 offer) With hardened handle protective steel sleeve, tapered collar, fixing plate and wood screw With this standard wooden handle, according to DIN 5111 it is possible to convert even ordinary hammer head... |
|
from € 10.91*
per piece |
|
|
Gedore 8597960 hand tool shaft/handle/adapter (1 offer) Ash (E 600 E) or hickory (E 600 H) DIN 5111. With hardened handle protective steel sleeve, tapered collar, fixing plate and wood screw. With this standard wooden handle, according to DIN 5111 it is... |
|
from € 18.68*
per piece |
|
|
Gedore 8599070 hand tool shaft/handle/adapter (1 offer) Ash (E 600 E) or hickory (E 600 H) DIN 5111. With hardened handle protective steel sleeve, tapered collar, fixing plate and wood screw. With this standard wooden handle, according to DIN 5111 it is... |
|
from € 21.20*
per piece |
|
|
Gedore 8596560 hand tool shaft/handle/adapter (1 offer) Ash (E 600 E) or hickory (E 600 H) DIN 5111. With hardened handle protective steel sleeve, tapered collar, fixing plate and wood screw. With this standard wooden handle, according to DIN 5111 it is... |
|
from € 14.86*
per piece |
|
|
