| | | | |
Picture | | | | Order |
|
|
|
|
from € 2.70* per piece |
|
|
kwb 450607 open end wrench (1 offer) TÜV Rheinland GS tested, DIN 3110, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
from € 3.16* per piece |
|
|
|
|
from € 3.36* per piece |
|
|
kwb 451617 (1 offer) TÜV Rheinland GS tested, DIN 3110, CrV steel, satin finish, wave profile, for use with hexagonal or square nuts and bolts |
|
from € 3.53* per piece |
|
|
|
|
from € 3.58* per piece |
|
|
|
|
from € 3.95* per piece |
|
|
|
|
from € 4.10* per piece |
|
|
Gedore 6585450 open end wrench (1 offer) Acc. to DIN 895, ISO 3318, ISO 1085. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 34x36 mm, steel-grey up from 36x41 mm and larger. * not standardised. |
|
from € 4.47* per piece |
|
|
|
|
from € 4.47* per piece |
|
|
|
|
from € 4.47* per piece |
|
|
Gedore 6583910 open end wrench (1 offer) Acc. to DIN 895, ISO 3318, ISO 1085. Jaw set at 15°. Gedore vanadium steel 31CrV3. Manganese-phosphate finish up to 34x36 mm, steel-grey up from 36x41 mm and larger. * not standardised. |
|
from € 4.48* per piece |
|
|
STAHLWILLE 10 (2 offers) Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact into considera... |
|
from € 4.66* per piece |
|
|
|
|
from € 5.01* per piece |
|
|
|
|
from € 5.02* per piece |
|
|
|
|
from € 5.02* per piece |
|
|