Track & Ballast (834 items)

6 pieces. 10 x 5 x 1.5 mm / approx. 25/64" x 3/16" x 1/16". This magnet is for activating 7555 reed switches. It is for locomotives with little ground clearance.

2 pieces. 10 x 10 x 3 mm / approx. 3/8" x 3/8" x 1/8". This magnet is for activating the reed switch. It is for freight and passenger cars.

The basic 300 mm / 11-13/16“ straight section is the foundation of the LGB track program. All LGB track sections are made with solid brass rails for reliable operation indoors and outdoors.

52 mm / 2-1/16“ long straight section of track for a variety of uses.

82 mm / 3-1/4“ long straight section of track.

This straight section of track can be adjusted quickly and easily to any length between 88 and 120 mm / 3-1/2“ and 4-3/4“. No tools are required to do this.

This set allows you to set up a trouble-free reverse loop circuit for analog operation without additional wiring. The set contains an LGB 10152 separation section of track and a special section of ...

Both rails are separated or gapped on this section of track that can be used for many purposes. A hidden terminal clip facilitates electrical connections. The length of this section of track is 150...