Track & Ballast (101 items)

Flexible installation in straight and curved tracks Can be used from radius 2 (r= 358 mm)

With built-in reed switch, to be actuated by means of a 42256 magnet.This potential-free switching contact can be installed at any point of a track layout. The size and colour of the sleeper goes w...

Prototypical stable construction for all Gauge H0 track systems. Including 2 brake shoes to clip onto the rail.

Universal bedding switch drive. Low switching current consumption, limit switch. Note please: Like all ROCO switch drives, this drive of course features a limit switch. However, as the adjuster of ...

Suitable for all ROCO LINE bedding switches. The digital switch drive is simply plugged into the recess on the underside of the switches. The electrical connection is made with two cables directly ...

With the dampening elements the geoLine-tracks can be additionally insulated against the ground in order to reduce the transmission of driving noises.

Electrically operated turntable for 3-rail AC system, with turntable control switch 6909. The turntable is prototypically mounted in a recess and fitted with accurate details. As delivered, there a...

Adapter track for straight turnouts, threeway-turnout and double-slip.

Triggers a switching pulse while running axles with a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions. With fault clearance to av...

Electric uncoupler track, length: 100 mm, with electric motor. Digitally switchable with uncoupler decoder 61197.

Adapter track G100 between geoLine tracks and ROCO LINE tracks, length: 100 mm.

Short compensation piece for the use of the geoLine tracks on NOCH layouts.

Short compensation piece for the use of the geoLine tracks on NOCH layouts.

Length 200 mm (standard length), branch radius 502.7 mm, branch angle, 22.5°. Suitable electric turnout mechanism: 61195. For digital operation is the special turnout decoder 61196 available. The p...

Length 200 mm (standard length), branch radius 502.7 mm, branch angle, 22.5°. Suitable electric turnout mechanism: 61195. For digital operation is the special turnout decoder 61196 available. The p...

Radius of the main track and the branch line 434.5 mm, arc angle 30°. Suitable electric turnout mechanism: 61195. For digital operation is the special turnout decoder 61196 available. The polarizat...

Three-way turnout, symmetrical, manually operated. Length 200 mm (standard length), branch angle, 22.5° each, branch radius 502.7 mm each. The two manual turnout mechanisms can be replaced by the e...

Double slip turnout, manually operated. Length 200 mm (standard length), branch radius 502.7 mm, crossing angle 22.5°. The two manual turnout mechanisms can be replaced by the electric turnout mech...

To finish of the tracks properly in the case of track bumpers, display case track etc.

Used to equalise differences in length of the flex track 61106.